Bromsgrove Defender
Well-Known Member
- Posts
- 5,759
- Location
- Out to lunch
power steering
- Thread starter Dopey
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
I use the same atf as the gear box ATF DEX III, but lately changed most fluids to Lucas equivalent,
this for power steering: Lucas Power steering fluid with conditioners- extends life of steering system | eBay
The way I do is using large syringe for power steering and brake fluids, you won't get all in one go but do it often
Syringe: http://www.ebay.co.uk/itm/SILVERLIN...t=UK_Hand_Tools_Equipment&hash=item2ecd706faa
Last edited:
Looked at rave and found this.. 57 STEERING NEW RANGE ROVER
10 REPAIR
POWER STEERING SYSTEM - BLEED
Service repair no - 57.15.02
6. With engine running, carefully open bleed screw
until fluid starts to flow. Tighten bleed screw to
4 Nm (3 lbf.ft)
7. Switch off engine. Top up reservoir.
But no pick showing the nut, dum asses
10 REPAIR
POWER STEERING SYSTEM - BLEED
Service repair no - 57.15.02
6. With engine running, carefully open bleed screw
until fluid starts to flow. Tighten bleed screw to
4 Nm (3 lbf.ft)
7. Switch off engine. Top up reservoir.
But no pick showing the nut, dum asses
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
Think you will find a small bolt with a hole in it on the top of the steering box used to fit a bleed nipple ON OLDER MODELS. Just in case anyone thinks you remove it and fit a b/nipple
used to fit a bleed nipple ON OLDER MODELS. Just in case anyone thinks you remove it and fit a b/nipple
Last edited:
Similar threads
Freelander 2 (LR2)
Noise when turning steering – Freelander 2 TD4
