Polybush which ones and why??

Need to re bush my 2000 TD5 110CSW, which are the best bushes to go for. Have seen different makes at different prices. Also, any special tools needed, am I going to find problems along the way?

Landy is mainly for road use, well loaded down regularly, which type of bush would you recomend

I have polybushed my 90 with blue soft ones but the ride is still too harsh i will replace them wit original ones next time id keep original ones cheap and nice soft ride

Stick to genuine / original bushes.
Polybushes don't last 5 minutes.

You'll need a good supply of hacksaw blades, a big hammer and a big vice.

Thanks Guys

All I wanted to do was try to reduce the roll a little and sharpen up the steering, but you guys recon stick to rubber,

Any other thoughts?

if it was me mate i would put the orignal ones back in you can buy them from places like craddocks dirt cheap the only problem youll have is that they are tight ibviously so i cus old ones out and then used some heavy duty all thread and nut and washers to pull new bushes into hole but loob outside of bush befroe pulkling in and make sure it starts of square otherwise its a pig