Polybush advice needed.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Ian_Td5

New Member
Posts
81
Location
Betteshanger
My Td5 having covered 105k feels a bit 'loose' so I was thinking about tighnening her up a bit by fitting a polybush kit & new set of gas shocks & springs. What I was wondering was if its a straight forward job replacing old bushes for new or do I need any special tools etc?
Thanks Ian :)
 
it can be a pain to get the old ones out , pretty much needed to burn some of mine out , but once they are out its pretty streight forward to fit the new ones , yer springs and shockers should feel a whole lot better aswell ...
 
oooooo yu dont wanna do that:(


"The angel of the Lord appeared to him in a flame of fire from within a bush. He looked – and the bush was ablaze with fire, but it was not being consumed! So Moses thought, “I will turn aside to see this amazing sight. Why does the bush not burn up?” When the Lord saw that he had turned aside to look, God called to him from within the bush and said, “Moses, Moses!” And Moses said, “Here I am.” God said, “Do not approach any closer - your landy is on fire! "
 
oooooo yu dont wanna do that:(


"The angel of the Lord appeared to him in a flame of fire from within a bush. He looked – and the bush was ablaze with fire, but it was not being consumed! So Moses thought, “I will turn aside to see this amazing sight. Why does the bush not burn up?” When the Lord saw that he had turned aside to look, God called to him from within the bush and said, “Moses, Moses!” And Moses said, “Here I am.” God said, “Do not approach any closer - your landy is on fire! "


am scared ****less now ...... wont be burnin anymore bushes thats a fact ...:eek:
 
Back
Top