Poly Bush! Any Gud????

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Wanagetmuddy said:
what you getting out of a full tank on the veggie !!

I had a go wiv the Bio diesel, ran 3/4 bio and the rest on diesel seem to loose power in my opinion, and stank really bad and puffed out a lot of white smoke.

For some reason it started to smoke a lot and I kinda got a bit weary with it and gone back on running on diesel.
Click to expand...


not done my first tank yet
let you know when i have
still runnin fine though:D
 
Wanagetmuddy said:
what you getting out of a full tank on the veggie !!

I had a go wiv the Bio diesel, ran 3/4 bio and the rest on diesel seem to loose power in my opinion, and stank really bad and puffed out a lot of white smoke.

For some reason it started to smoke a lot and I kinda got a bit weary with it and gone back on running on diesel.
Click to expand...
Commercial bio is made from recycled veg, which has a high water content which needs to be removed. Sounds like your producer mightn't have dried it out properly. Try neat 50/50 veg oil, much better, also the govt don't tax it like they do commercial bio so it's cheap!.
 
odenne said:
Commercial bio is made from recycled veg, which has a high water content which needs to be removed. Sounds like your producer mightn't have dried it out properly. Try neat 50/50 veg oil, much better, also the govt don't tax it like they do commercial bio so it's cheap!.
Click to expand...

Thanks Odenne

Will I need to add any other chemicals or would that only be on neat Veg oil

I know my mate has done it on 50/50
and has worked

Does it affect the performance
 
Wanagetmuddy said:
Thanks Odenne

Will I need to add any other chemicals or would that only be on neat Veg oil

I know my mate has done it on 50/50
and has worked

Does it affect the performance
Click to expand...

yes it does affect your performance:eek:
its much better if you ask me, more power, less gear changes:D
does run **** for about five seconds when you start it up though
but i can live with that on a cold mornin:rolleyes:
 
well folks! weather is fookin lurverly an its time to get me bushes out (oh poly bushes that is) now its warmed up a bit.
so advice needed please, is there any thing i need speshully to do the job other than some stilsons, loads of spanners an sockets, jacks, axel stands, fookin big bar, hammer or two, blow torch, oh an plenty of beer.
is there any parts that are bound to break that i should buy b4 i start?
an does any one wanna help?:rolleyes:
thanx in advance
nick
 
nickh75 said:
well folks! weather is fookin lurverly an its time to get me bushes out (oh poly bushes that is) now its warmed up a bit.
so advice needed please, is there any thing i need speshully to do the job other than some stilsons, loads of spanners an sockets, jacks, axel stands, fookin big bar, hammer or two, blow torch, oh an plenty of beer.
is there any parts that are bound to break that i should buy b4 i start?
an does any one wanna help?:rolleyes:
thanx in advance
nick
Click to expand...
Ah reckon ye've got it pretty much covered nick;) Only other thing ah can think off is more beer;) :D
 
oh ****e!:eek: i knew i'd miss something!


mornin buster how ya doin mate? bet ya knaked after ya long drive,
5 hours is long enuf for me never mind 12:eek:



do you think a new bolt set would be a good idea (20 quid frim paddocks) or is it not really needed?
 
nickh75 said:
oh ****e!:eek: i knew i'd miss something!


mornin buster how ya doin mate? bet ya knaked after ya long drive,
5 hours is long enuf for me never mind 12:eek:



do you think a new bolt set would be a good idea (20 quid frim paddocks) or is it not really needed?
Click to expand...
Mornin' nick, no sae bad, how's yersel'? Gettin' a wee bitty tired now;)

Ah think it's suggested that ye replace them, but ah never bothered and haven't had any probs yet and ah think that's nearly two years ago. Ah suppose if they're a bit crappy and knackered lookin, ye might as well change them for piece of mind;)
 
bustersbus said:
Mornin' nick, no sae bad, how's yersel'? Gettin' a wee bitty tired now;)

Ah think it's suggested that ye replace them, but ah never bothered and haven't had any probs yet and ah think that's nearly two years ago. Ah suppose if they're a bit crappy and knackered lookin, ye might as well change them for piece of mind;)
Click to expand...



i'm not too bad thanx, think i'm orf ta bed tough its getin bit latean i gota take the kids to skool in the morn,

but by the amount of waxoil of the nuts an bolts think i'll ave to warm em all slightly to shift em, so i think i'll replace em anyway, at least they should be a bit easyer to shift next time.:D


reet i'm orf ta bed, me typins gone all ****e an its takin me ages coz i keep puttin extra letter in an missin em out:eek:

catch ya l8 mate
 
nickh75 said:
i'm not too bad thanx, think i'm orf ta bed tough its getin bit latean i gota take the kids to skool in the morn,

but by the amount of waxoil of the nuts an bolts think i'll ave to warm em all slightly to shift em, so i think i'll replace em anyway, at least they should be a bit easyer to shift next time.:D


reet i'm orf ta bed, me typins gone all ****e an its takin me ages coz i keep puttin extra letter in an missin em out:eek:

catch ya l8 mate
Click to expand...
Aye nae wurries, catch ye later;) :D
 
nickh75 said:
well folks! weather is fookin lurverly an its time to get me bushes out (oh poly bushes that is) now its warmed up a bit.
so advice needed please, is there any thing i need speshully to do the job other than some stilsons, loads of spanners an sockets, jacks, axel stands, fookin big bar, hammer or two, blow torch, oh an plenty of beer.
is there any parts that are bound to break that i should buy b4 i start?
an does any one wanna help?:rolleyes:
thanx in advance
nick
Click to expand...




any more idea's would be good folks
 
I renewed all bushes with poly ones last year, Disco does a lot of caravan towing, no problems at all, very smoth ride with no knocks or clunks. Would go for polys any time.
 
You must log in or register to reply here.

Similar threads

MrNasty
A quick question about poly bushes on RRC radius arms
Replies
8
Views
717
MrNasty
MrNasty
J
Re: Bush supports forest fees, and privatization of your public lands
Replies
0
Views
2K
John
J
Back
Top