Zebravanman
New Member
- Posts
- 9
Please identify this part for me
- Thread starter Zebravanman
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Not sure freelander 2?
Goggle from the number
To this
www.lrparts.net
To this. Bottom center right in the drawing
parts.jaguarlandroverclassic.com
J
Goggle from the number
To this
LR102723 - HEAT SHIELD - SENSOR | LR Parts
To this. Bottom center right in the drawing
LR102723 - Land Rover Heat Shield
Genuine LR102723 - Land Rover Heat Shield available from Jaguar Land Rover Classic Parts. We supply authentic parts for classic Jaguars and Land Rovers.
J
- Posts
- 6,135
- Location
- North Manchester
It probably fell off when he wasn't looking 
If it was a series or defender sure, but Freelanders aren't known to fall apart by themselves.It probably fell off when he wasn't looking
It's definitely been fitted at some point. I might have a look at mine to see if I can locate where it's supposed to be fitted.
- Posts
- 6,135
- Location
- North Manchester
If it was a series or defender sure, but Freelanders aren't known to fall apart by themselves.
This could explain it
- Posts
- 6,135
- Location
- North Manchester
or
- Posts
- 6,135
- Location
- North Manchester
or
- Posts
- 6,135
- Location
- North Manchester
Appears to be a silencer bracket
My last link I posted has a dia seems to go over/around the PAS pipes.
Also seems to fit many in the range of JLR cars.
J
Yes looking at the pictures it's something to do with the steering assembly on the Ford EUCD derived platform vehicles,, and the JLR D8 platform too by the looks of it.
I'm assuming the OP has a FL2, which is why he's asking about this part.
I'm in no hurry to get under mine to see where it's located, as the OP hasn't been on since the weekend anyway.
