please help me
- Thread starter phils 110
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 83,310
- Location
- Embasinga stocæ
relay?
- Posts
- 83,310
- Location
- Embasinga stocæ
do yu have one for the headlights?
- Posts
- 83,310
- Location
- Embasinga stocæ
maybe yu aint got one then.
- Posts
- 83,310
- Location
- Embasinga stocæ
download a rave manwell if yu int got one?
look in a haynes?
check the switch
check the wiring
look in a haynes?
check the switch
check the wiring
Domo
New Member
- Posts
- 26
- Location
- Valentia island
there is a realy behind the speedo in the dash board.
If that doesn't work it could be ur switch.
what year is ur defender
If that doesn't work it could be ur switch.
what year is ur defender
fenby1976
New Member
- Posts
- 1,036
- Location
- West Wales
If you don't have a Haynes manual and a multimeter, I would advise you to get them. Then use the multimeter to measure the voltage at the connector which fits onto the bulb. There will be a switch possibly a realy, a fuse and there may be several connections between the bulb and the positive terminal on the battery, so turn on the light switch and work your way back along the circuit towards the battery measuring the voltage at each join. When you get a reading of 12v then you know that the cable or component between where you are measuring now and where you took your last measurement is faulty or the connection is faulty. Good luck!
Oh yeah and check the earth connection to the bulb too.
Oh yeah and check the earth connection to the bulb too.
HOOK
New Member
- Posts
- 431
- Location
- rossendale
normaly switch.does dim dip work. i think headlight relay is one of the three in passenger compartment fuse box, details on cover
iannotts
New Member
- Posts
- 4,401
- Location
- East midlands,
bad earth or fooked swtich. 
Domo
New Member
- Posts
- 26
- Location
- Valentia island
hi phil.
we had a problem on a 99. 110sw the owner had changed the bulbs in the headlights from 60/55's to 100/90's and it melted the switch.
its an easy change any defender switch will do same colour code but different plug on the end just swap the plugs.
