Plastic Plug from 300Tdi

GraemeAS1 · Apr 13, 2015

Hi,

I'm new to the forums so apologies if this is the wrong place... I'm after a bit of Land Rover knowledge and this seemed like the ideal place!

I'm trying to find out any information on this plastic plug that we took from a 300Tdi, any info on where it fits, where I can source one etc. would be fantastic.

Apologies for the photo, it's not the best quality but it's the best I have I'm afraid.

Any help you can all give would be greatly appreciated!

blue beasty · Apr 13, 2015

I can pretty confidently say it's not a Series LR standard part

I'll move it for you

chrisrr · Apr 13, 2015

can't say I recognise it from a classic set up. Whereabouts did you 'remove' it from ? . A rough location may yield a clue or two. Also which vehicle/year

jamesmartin · Apr 13, 2015

GraemeAS1 said:
Hi,

I'm new to the forums so apologies if this is the wrong place... I'm after a bit of Land Rover knowledge and this seemed like the ideal place!

I'm trying to find out any information on this plastic plug that we took from a 300Tdi, any info on where it fits, where I can source one etc. would be fantastic.

Apologies for the photo, it's not the best quality but it's the best I have I'm afraid.

Any help you can all give would be greatly appreciated!

looks like the main fuses ,located on lhs of bulkhead under bonnet on a defender

trax · Apr 13, 2015

showing the wires would have been useful as you can look at the schematics and work it out from the colours

GraemeAS1 · Apr 14, 2015

Hi,

Thanks for your help so far, in answer to your questions...

It came from a 1994 300Tdi (SALLDVA67WA143875)

The original harness part number was AMR4082.

It was situated next to the glow relay.

There are 4 heavy brown feed wires going into it.

Hopefully that will help!

jamesmartin · Apr 14, 2015

GraemeAS1 said:
Hi,

Thanks for your help so far, in answer to your questions...

It came from a 1994 300Tdi (SALLDVA67WA143875)

The original harness part number was AMR4082.

It was situated next to the glow relay.

There are 4 heavy brown feed wires going into it.

Hopefully that will help!

post 4 it holds the main h/d fuses

GraemeAS1 · Apr 16, 2015

Does anyone know where I might be able to get hold of these?

Plastic Plug from 300Tdi

GraemeAS1

New Member

Attachments

blue beasty

Leaks an prone to bits dropping off

chrisrr

Member

jamesmartin

Well-Known Member

trax

.

GraemeAS1

New Member

jamesmartin

Well-Known Member

GraemeAS1

New Member

Similar threads