Pictures of repairs to my 110

You've done a fantastic job there

RAGNAR BENSON said:

You've done a fantastic job there

Click to expand...

Why thank you Sir!

Started fitting tread plate to the bonnet today, got the bonnet and N/S wing done.

But the O/s wing is too high for the tread plate to fit under the bonnet so will have to loose the wing and push it down before i can fit the tead plate to that side.

Here's a pic of how it looks, getting near completion of the exterior now.

Looks wicked does that

Well done that man

Wow! That is very inspiring. My old 90 Slapper still looks like the first pic. I live in hope... Well done. Your landy looks awesome!

Loads of progress made today on my landrover.

Started doing the work required for its MOT.

Fitted new washer jet and pump.

Finished the tread plate on the wing

Fitted grab handles to the rear cross member

and generally F*$ked about with my landy all day!

Heres some pictures taken today:

from this:



To This:

very nice good work mate looks ace

Yep - all credit due, you've certainly transformed that truck!!!

defender11069 said:

very nice good work mate looks ace

Click to expand...

Thanks

Nice 110 mate

Looks brrrrilliant, and got the lump to match!

Would be really interested to see how the Isuzu engine compares to the 300TDi

Bastard of a job this evening!

Rear axle A Frame ball joint, the dust cover was all split (MOT failure) so i went about fitting a new one.


Split pin removal:


Big nut remoaval:


A frame bolt removal:




Ball joint removal:


Pretty easy up til now, I spent about 10 minutes belting **** outta the joint to get it to come out of the housing with no such luck.

So i used the grinder and cut the two lugs off it each side]





Easy then just put it in the press and pushed it out.



Pressed the new one in:



Then refitted it all to my axle again.



Took me 3 hours to do that dont know quite why it took so long??

Also fitted my new step which doubles as a bumper.

Thanks for posting that I will have to get mine done shortly! Once I get some fancy pizza!!!

sinclair182 said:

Thanks for posting that I will have to get mine done shortly! Once I get some fancy pizza!!!

Click to expand...

Was starving after all that belting the joint with the hammer, so dominoes was called for. lol

Well my landrover has finally passed its MOT! :5bcheers2:

Annoying thing is i cant tax it yet cause i sent the V5 off to have the details updated for the engine conversion and colour.

Still got plenty to do on it though, nearly finished the interior now.
Then kit out the back and still gotta change the cambelt before it becomes my daily driver.

Tunelessblues said:

Well my landrover has finally passed its MOT! :5bcheers2:

Annoying thing is i cant tax it yet cause i sent the V5 off to have the details updated for the engine conversion and colour.

Still got plenty to do on it though, nearly finished the interior now.
Then kit out the back and still gotta change the cambelt before it becomes my daily driver.

Click to expand...

great news about it passing, needs some more pics.
Sam

Drove it home to day for the first time, didn't take it above 60, all seems great so far.

Tax it in the morning ready to drive and tow people out of the white stuff

Great thread, I don't think I will be the only one pinching a few of your ideas