Pick up rubber part no.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Maverick2518

Active Member
Posts
108
Location
East Sussex
hi all!

Could any of you fortunate people that have a parts book be able to tell me the proper name/number for the lower seal on the lower fold down rear door please. I have the van back with a cat flap upper.

That does make sense to me! Haha.

Mav
 
Is this it?.....

48088989432_6a1eea58cd_b.jpg



https://www.johncraddockltd.co.uk/l...l-for-doors-1954-58-and-tailgate-1954-84.html
 
I ordered the rubber, thanks to the help on this thread. But I didn’t look at the rivet things they use until I came to fit it. 78321 are the ones I’m supposed to use, but they look very different to normal rivets. Do I need a specific tool to got them, is there a knack/trade secret at all?

Many thanks
 
My rubber seal has a plate above and fixed with self tappers , I’m not sure if the part no you mention is for the rear body bolts shown in pic


0A855077-7349-46B5-9ED0-6A64F249AEEA.png
 
Thanks for the replies. The seal I have is as pictured, and I can’t really work out where it’s supposed to go haha.
 

Attachments

  • EF7729E1-50FD-46B0-BA36-8B21EC97E10A.jpeg
    EF7729E1-50FD-46B0-BA36-8B21EC97E10A.jpeg
    231.8 KB · Views: 128
Looking at the part diagram above , I think it’s different to the safari door type where seal fits on back of tub, yours looks like it fits on tailgate to replace that black mess on pic, looks like it pop rivets on , if you cleana off the mess and place it in position and close tailgate check it closes and seals and if so pop it on
 
I’ve tried it in many varying ways and it always pushes the tailgate out a bit. But it is a new seal...and Brit part! But atleast it’s tight I guess. I agree with you Steve, it’s just the rivets the other side that threw me a bit. Not the normal rivets I use haha.
F7F1CD84-ED22-4D55-9DEC-DA0C5FD194B1.jpeg
 
Back
Top