PCD SerI and II Disco

F

fanie

Guest

• Jan 18, 2006

• #1

Hi All

I am making up a bracket to carry two spare tires on my trailer. My
trailer runs on Old Landy tyres that came off the SerIII, however I am
currently towing with a Disco Ser1 and might at some stage replace
this with either a Disco Ser2 or 110 Td5. Do all these products use
the same PCD for the wheels? I would not want to weld everything up
and have to chuck it for seom silly reason.

Regards
Stephen

 

N

Neil Brownlee

Guest

• Jan 18, 2006

• #2

PCD is different for the D2, but not the 110

--
Neil

 

W

[email protected]

Guest

• Jan 18, 2006

• #3

fanie wrote:

> Disco Ser2 or 110 Td5. Do all these products use the same PCD for the wheels? I would
> not want to weld everything up and have to chuck it for seom silly reason.

I think you'll find that if you got a 110 you would be OK, but the
Series II disco has a different PCD. Someone else can confirm that.

Regards

William MacLeod

 

F

fanie

Guest

• Jan 19, 2006

• #4

Well I guess that settles it then, 110 it is!

Regards
Stephen

On 18 Jan 2006 03:57:55 -0800, "[email protected]"
<[email protected]> wrote:

>fanie wrote:
>
>> Disco Ser2 or 110 Td5. Do all these products use the same PCD for the wheels? I would
>> not want to weld everything up and have to chuck it for seom silly reason.
>
>I think you'll find that if you got a 110 you would be OK, but the
>Series II disco has a different PCD. Someone else can confirm that.
>
>Regards
>
>William MacLeod