Passenger seat

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Stephen96

Member
Posts
62
Location
Hull
Anybody removed the front passenger seat on the l322 before just wondering how hard it is or if its straight forward? Mine is a 54 plate vogue
 
Because I am feeling generous, you can have this one:

upload_2020-2-14_14-16-22.png


Get it off your phone and onto a PC....much easier!
 
I managed to get to the Bcu the owner before me obviously wasnt very hygienic as found some kind of mouldy sticky substance all in the wiring but on plus side two pound coins.
 

Attachments

  • 20200214_145839.jpg
    20200214_145839.jpg
    277.9 KB · Views: 98
  • 20200214_145912.jpg
    20200214_145912.jpg
    202.7 KB · Views: 75
  • 20200214_145831.jpg
    20200214_145831.jpg
    226.8 KB · Views: 87
£2 jeez that doubles the value of an L322 :D
Just pulled carpet up after removing passenger seat and unlocking the BCM and found a pool if you can see on pic.
 

Attachments

  • 20200214_161124.jpg
    20200214_161124.jpg
    237.2 KB · Views: 98
Last edited:
It gets worse, all the wiring is sat flooded all along I'm not sure were its come from, one of the drains blocked mabey, any suggestions wood be appreciated also is it true that the sunroofs are prone to this happening?
 

Attachments

  • 20200214_163335.jpg
    20200214_163335.jpg
    245.6 KB · Views: 82
  • 20200214_163359.jpg
    20200214_163359.jpg
    218.8 KB · Views: 114
I'm guessing theres not much you can do with the bcu I have had it out and all looks clean and dry circuit board looks healthy no signs of water even though I can't actually get it out of the plastic casing itself, I have noticed people tend to just get a new or second hand BCU I'm guessing thats all I can do since the circuit board isn't really accessible but also I have read if I get another it will need an update so how much am I looking at for this update as I don't have the programme or software to do this?
 
Back
Top