Part number question for Disco 2 td5

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

allegedly

Member
Posts
54
Location
Fort William Scotland.
Hi guys,
I can't seem to find a diagram showing the O ring/seal/washer that goes in-between the low pressure supply adaptor pipe and the bottom of the power steering pump.
It's a small, slightly bent pipe with a diamond shaped plate with two bolt holes and the 'O' ring goes over the short, upper part of the pipe and sits against the back of the plate.
Two requests:
Can anyone tell me the part number of the O ring/seal so I can order one?
Secondly, can anyone recommend a free download of a D2 manual that lists part numbers with 'exploded diagrams' ?
Thanks
Rob
 
its part of the pump assembly so i doubt its sold separately,though you could just buy a replacement o ring its not specialised
 
Thanks biggeee, I've trawled through those two sites and they don't seem to list the seal. Or if they do, I've not found it.
I've spent a few days (it's pished down here non bl***y stop for a bit) looking on line for parts manuals/numbers and no luck as yet.
That's what I've been after James. I found a diagram showing the pump 'exploded' and it showed the seal but that was weeks ago and as is the way of things, I didn't save the page and now can't find it anywhere and naturally, didn't make a note of the part number of the O ring seal !!! Managed to get the O ring numbers from the top of the steering box but not for the low pressure inlet pipe adaptor on the pump.
I'll keep looking though, no choice, need my car back !! And if it's not raining, i'll be out there fixing the deer impact damage.
Thanks guys
Rob
 
Back
Top