part number needed for manifold bolt

Completing the egr blank and jet washing the manifold on Saturday I accidentally dropped the bolt that holds the manifold down. There are 8x10mm bolts on the top and 4x11mm nuts on the bottom with an 11mm bolt that is situated on the bottom left. This is the bolt I dropped and it's somewhere below probably laying on the plastic sump guard. Does anyone have access to Landrover specs so I can order please?.......thanks in advance

Have a look here,

http://allbrit.de/UGCtree.cfm?SPRACHE=EN

Cheers

If it is laying on the engine guard, then a series of thumps from underneath will make it bounce and eventually fall to the floor.
I have done that several times now after dropping bolts.

I took it for a spin after and if it did fall out it's on the dual carrageway Thanks neilly. Looking at the catalogue it looks like bolt number 9 on the TD4 engine description.

you can get at them easy if you lift the side guard up enough to get in there.

neilly said:

Have a look here,

http://allbrit.de/UGCtree.cfm?SPRACHE=EN

Cheers

Click to expand...

There used to be a landrover freelander catalogue in the link neilly posted. Does anyone know has it been deleted because it's gone?

Found what I'm after. Thanks

dwalsh1 said:

Found what I'm after. Thanks

Click to expand...

PK, but just in case, You now have to search for allbrit and then the vehicle you are searching for.

The updated allbrit LR website no longer had part number sonit.

Cheers

Thanks mate