Parking Sensors For P38

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
i got them on mine, the hole cutter they provided was less than useless, it strugled with the plastic, let alone the metal so i drilled as large a hole as poss and went to town with a round file, took 20 mins per hole a spose! then connected 2 wires, thats it..................
 
thanks
so the metal is not so strong ... so it is an easy job !
thanks again redrange
regards !
i wouldnt say that, you will break before it does!
its as strong as steel as it is steel but its possible to do the job say 15/20 mins per hole
 
parking in my street is a nightmare at the best of time, a friend of mine says he reverses till he get a nudge sound, trouble is when all other cars around are so much smaller a nudge comes with a crack and it susually front grill!
allthough the P38 is such an easy motor to drive/park having parking sensors have made it just so much easier.
(and its cool too)
 
parking in my street is a nightmare at the best of time, a friend of mine says he reverses till he get a nudge sound, trouble is when all other cars around are so much smaller a nudge comes with a crack and it susually front grill!
allthough the P38 is such an easy motor to drive/park having parking sensors have made it just so much easier.
(and its cool too)

thanks a lot redrange for your help .
regards .
 
which kits can anyone recommend? i have been thinking about this recently, not too expensive to do either...
 
who did take photos for fitted sensors ?
would you please expose them !

1stpolish006.jpg
 
Back
Top