Paint work

If the paint is really dull does it mean a respray?
Or is there any magic that can be done to make it look shiny and new?

T-cut?

as buster say fookin loads an loads of t-cut

then try some colour magic!!!! about 7 quid normally from your local motor factors

VanMamber said:

If the paint is really dull does it mean a respray?
Or is there any magic that can be done to make it look shiny and new?

Click to expand...

my personal favorite How to restore dull, oxidized paint using an orbital Polisher

get it right an it will look like this http://i212.photobucket.com/albums/cc140/stevieb42/Freelander/Freelander008.jpg

but why would you want too !! its a series , they aint supposed to be shiny

Aye surely the question should be "How do I get that dull matt finish that series Land Rovers are so well known and loved for??"

stevieb42 said:

but why would you want too !! its a series , they aint supposed to be shiny

Click to expand...

Mines shiny!

dantaylor360 said:

Mines shiny!

Click to expand...

not in your avatar it`s not ... unless thats shiny mud

goodnight chaps I'm away to me bed.

redhand said:

goodnight chaps I'm away to me bed.

Click to expand...

aye, catch ye later Red Ah'm off to, got a days ferretin' ahead of me

The thing is that the original blue is lookin almost grey, it's that bad. So, the plan is get it looking shiny and then work on getting it to that dull matt colour afterwards, hoping that it'll still look blue.
Thanks for the advice, I will be getting to work!

Try Washing It With A Cup Full Of Bold 3 In 1 In A Bucket Of Boiling Water. Use A Sponge And Then Rinse It Off With Cold Water











YER CAN USE ANY SORT OF WASHIN POWDER BUT THE DORIS BUYS BOLD

Are you serious or just trying to get me out there rubbing down my landy for no real reason? : ) How does washing powder make the colour in the paint come back?

the colour on yer paint is still there its just hidden under the smeg and scratches that have built up on it. like any polishing you need to take the top layer orf to get back to smooth shiney stuff

Great, well, I will give it a go
thanks

dint ferget yer apologie and yer gratitude once yer have done it. remember to use boiling water straight from the kettle. you will need a pair of thick rubber gloves as well

Farcla G3, is flippin great. Used it loads and it doesn't fade again like T-Cut can. But i would only use with a mop as its hard work.

edd 2A said:

Farcla G3, is flippin great. Used it loads and it doesn't fade again like T-Cut can. But i would only use with a mop as its hard work.

Click to expand...

can yer explain how t-cut can fade?

It does slob I bought a bottle of the red t-cut for me mars red golf wot I had and when I opened the bottle it had faded ter pink. I took it straight back to the shop and demanded me dosh back. Daft twot tried ter tell me it was supposed ter look like that!!! Yeah reet do ah look like ah a mug ah asked him, does ah WELL DOES ah yer fooking twot he was.