Pain in the ar*e drivers door.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

IamRobbie

Well-Known Member
Posts
2,800
Location
Derbyshire, j28 M1
Hi all. I have a problem with my divers door on my 5 door discovery.

In order to open the driver door I have to pull up the latch that comes up when i unlock the door, only about 2mm. I have read posts that say you can adjust the bars inside the door and this I have done but still nothing. When I try to open the door there is no force on the handle until I hold that latch. It's as if there's something not holding the bar when I pull the handle.:confused:

Any help would be appreciated hugely! If pics are needed I can post also.

Robbie
 
I have the same issue. The time spent leaning in and lifting the button 2mm far outweighs the time you can spend fu@kin about with the springs... LOL.
 
oh no! I had a look through that guide and didn't know that it was for the problem i was having :( is this practically the same for the front doors as the rear? Do i need to ebay the spring?

Thanks guys!
 
Ok I'm currently outside in this lovely march spring weather..... Just got the catch out, I had to unscrew and lift the frame around the window to get it out. The round springs arnt broke... Any ideas?
 
Quick update: put the new one in - it works! Just got the bar that goes up and down to show locked/unlocked and a linking bar which actually locks the outside lock, hmmm awkward.
 
Back
Top