P38A P38 Wing Mirrors Dipping Function In Reverse
- Thread starter tank93
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
I thought they all had it
apparently not.
think you need memory seats as a start, then hope all the wiring is in the loom under the seat.
That’s all I can suggest, as a start.
others may know more, if fact I know there are others that will know more
J
apparently not.think you need memory seats as a start, then hope all the wiring is in the loom under the seat.
That’s all I can suggest, as a start.
others may know more, if fact I know there are others that will know more
J
- Posts
- 4,476
- Location
- Rotherham
+1 I think it is a feature with the memory seats set up. There is some info in owners handbook about it
- Posts
- 58,170
- Location
- Preston Lancs.
You will need at the very least a memory drivers seat to active reverse mirror dip.
Datatek
Well-Known Member
- Posts
- 44,056
- Location
- Near Poitiers SW France
The memory seats option is a function of the Hi line BECM, so it may be possible to get it to work without the electric seat positioning. It's not possible with a Lo line BECM.
Henry_b
Think outside, no box required.
- Posts
- 15,356
- Location
- somewhere else
Pain in the ass that feature..
I'd do without it, especially as my NS mirror goes skyward...
I'd do without it, especially as my NS mirror goes skyward...
Pain in the ass that feature..
I'd do without it, especially as my NS mirror goes skyward...
I must admit it’s a feature I don’t like and feel with large wing mirrors is not needed.
Skyward
sounds like it needs resetting.J
Datatek
Well-Known Member
- Posts
- 44,056
- Location
- Near Poitiers SW France
I agree, unnecessary and a good way of wearing out the mirror mechanism.Pain in the ass that feature..
I'd do without it, especially as my NS mirror goes skyward...
Jon Dor
Well-Known Member
- Posts
- 1,672
- Location
- Beverley, East Riding of Yorkshire
Mine goes wrong way too. What's the reset protocol please...sorted all windows and sunroof already?I must admit it’s a feature I don’t like and feel with large wing mirrors is not needed.
Skyward
J
Mine hoes wrong way too. What's the reset protocol please...sorted all windows and sunroof already?
Is this what you asked?Replying within quotes is a brain fazzle
if so try this.
Automatic dipping for reverse gear selection
(if fitted)
Vehicles with a driver’s seat memory have a
pre-stored function which causes the mirrors to dip automatically whenever reverse gear is selected. If necessary the mirror positions can be altered as follows:
1. Turnthestarterswitchtoposition’I’or’II’ (do not start the engine).
2. Selectreversegear.
3. Adjusteitherorbothmirrorstothe
desired positions.
4. Press the seat MEMORY STORE switch together with either switch 1 or 2 (whichever corresponds with the driver’s seat memory) for 2 seconds (the message centre displays ’MIRROR DIP STORE
taken from the manual
J
Is this what you asked?Replying within quotes is a brain fazzle
if so try this.
Automatic dipping for reverse gear selection
(if fitted)
Vehicles with a driver’s seat memory have a
pre-stored function which causes the mirrors to dip automatically whenever reverse gear is selected. If necessary the mirror positions can be altered as follows:
1. Turnthestarterswitchtoposition’I’or’II’ (do not start the engine).
2. Selectreversegear.
3. Adjusteitherorbothmirrorstothe
desired positions.
4. Press the seat MEMORY STORE switch together with either switch 1 or 2 (whichever corresponds with the driver’s seat memory) for 2 seconds (the message centre displays ’MIRROR DIP STORE
taken from the manual
J
Jon Dor
Well-Known Member
- Posts
- 1,672
- Location
- Beverley, East Riding of Yorkshire
Thanks for that! Didn't realise it was linked with the driver seat memory function!Mine hoes wrong way too. What's the reset protocol please...sorted all windows and sunroof already?
Is this what you asked?Replying within quotes is a brain fazzle
if so try this.
Automatic dipping for reverse gear selection
(if fitted)
Vehicles with a driver’s seat memory have a
pre-stored function which causes the mirrors to dip automatically whenever reverse gear is selected. If necessary the mirror positions can be altered as follows:
1. Turnthestarterswitchtoposition’I’or’II’ (do not start the engine).
2. Selectreversegear.
3. Adjusteitherorbothmirrorstothe
desired positions.
4. Press the seat MEMORY STORE switch together with either switch 1 or 2 (whichever corresponds with the driver’s seat memory) for 2 seconds (the message centre displays ’MIRROR DIP STORE
taken from the manual
J
- Posts
- 15,249
- Location
- Benfleet, Essex
Switched it off on my car because it kept forgetting to un-dip the drivers mirror.
I decided moving me around to look at the rear-view in the standard mirror positions was less fuss.
I decided moving me around to look at the rear-view in the standard mirror positions was less fuss.
Marshall8hp
Well-Known Member
- Posts
- 297
- Location
- Sydney
Yep, just turn it off. Instructions in the handbook.
RangeRoller dt
Well-Sprung Member
- Posts
- 14,272
- Location
- Trapped inside my head @ LZ asylum
Most people turn it off as is problematic. Even with lifted DT I don’t really need it and if I have trailer can just adjust off switch pack controls
Salisbury Nick
Well-Known Member
- Posts
- 784
- Location
- Dorchester
it does not need to be linked to the seat memory.
Put car in reverse.
Set mirror to desired to postion
put car in any gear.
When you select reverse again it will return to your previously set reverse position.
- Posts
- 18,980
- Location
- Buckinghamshire, UK. ('95 DT)
Really? I wonder if that is post 98 models?
Salisbury Nick
Well-Known Member
- Posts
- 784
- Location
- Dorchester
Could be. That’s how it works on my L322 - and I think how it worked on my 4.6, but that had full memory seats. i’ll test it on my P38 which does not have memory seats.
Datatek
Well-Known Member
- Posts
- 44,056
- Location
- Near Poitiers SW France
Pretty sure it has to be enabled in the BECM, can't be sure as it's not a feature I would want so never looked closely.
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
Good job its not linked to the drivers memory otherwise most of us on here would be fecked.
