Hgvboy
New Member
- Posts
- 7
- Location
- Thornaby on Tees
Hi can anyone let me know if you can remove the brass airline collet on the top of the airbag and refit a new o ring as mine is leaking
P38 rear airbags
- Thread starter Hgvboy
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
brianp38dse
Well-Known Member
- Posts
- 20,094
- Location
- heathrow
You should be able to pop the collet out with a couple of flat screwdrivers from the side then the o ring can come out with a small pick.
- Posts
- 2,101
- Location
- Mull of Kintyre
A crochet hook?
Hgvboy
New Member
- Posts
- 7
- Location
- Thornaby on Tees
Thankyou
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
Is there one or two o rings?
- Posts
- 19,309
- Location
- Buckinghamshire, UK. ('95 DT)
Two, iirc.
Just to be clear, don't try to unscrew the brass connector, just pop out the collet located in it and you should see the o-rings.
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
Thought so.
Hgvboy
New Member
- Posts
- 7
- Location
- Thornaby on Tees
Thanks done it today replaced both o rings
Hgvboy
New Member
- Posts
- 7
- Location
- Thornaby on Tees
There were 2 orings in mine
Henry_b
Think outside, no box required.
- Posts
- 15,509
- Location
- somewhere else
There should be 2 O rings.
Quite a few cheap knock off airbags only have 1 and they always leak.
Quite a few cheap knock off airbags only have 1 and they always leak.
