P38 Parrot car kit installation

I am trying to install a parrot car kit in my P38, it has the Harmon Kardon DSP setup so I have ordered an Auto Leads adapter for it.

But during the install of my towbar I have notice a 3 pin connector in the boot with the label Phone on it and it suggests it has an audio input +ve and -Ve, and also a mute wire, has anyone used this for the installation of a car kit into a P38.

Thanks,
Jamie.

What yea is your p38? Do you have ISO connectors behind radio?

It is a 2001 car with ISOs for the radio.

where is this connector in the boot?

Wanting to fit a Car Kit to mine and this could be of help if it allows muting..

On mine it was with the wiring that goes to the sub, and CD changer.

Why! do yu want a parrot in your rangey?? It'll **** all over ya seats and annoy the fook out of yu while ya driving :lol:

Hi i have a Parrot fitted in my 2002 p38 and its does not use the phone harness by the subwoofer. It does work with the radio ie cuts out when making a call. I dont know how its wired as i dont have the radio removal tools.

to remove the radio in any make of car just get a little scroat in a hoody and give him half a house brick, bish bash bosh stereo out in a flash!

Hi just pop ya radio out and use the parrot harness kit provided! The kit has it's own amp and a load of relys to cut your music and route the phone audio to the speakers!! It's a easy job hardest bit is routing the mic wires lol

I know this is an old post, but today I fitted a Parrot Mki9000 into my P38 and I did it without an additional harness.I will post the wiring diagrams I used a bit later.
But it was easier than I thought as one of the normal ISO plugs fitted into the radio, and supplied the power and the mute functions. Which then only left the speaker wires to be connected.