Abit of help or advice needed guys...my p38 2.5 dse won't fire up...I'll be as clear as possible fuel going to the injector pump but not through to Injectors there's no air in the clear pipe it's been cracked and bleed countless Times still no fuel to Injectors
Just replaced the injection pump 4th injector crank shaft sensor wiring loom pump lift in the fuel tank...coolant temp sensor even stronger battery on it changed ecu over to new one (same code) and synced it up had it plugged in to nanocom and no faults are coming up except one about alarm system...cleared that replaced batterys in key and 're synced the key and still not firing up? Please please I'm all out of ideas and running out of patients with it anyone got any fresher ideas
It was cutting out every now and then and not starting again for few hours then all of a sudden it just cut out and never started again
This has no egr and no maf sensor
180k miles on the clock
Just replaced the injection pump 4th injector crank shaft sensor wiring loom pump lift in the fuel tank...coolant temp sensor even stronger battery on it changed ecu over to new one (same code) and synced it up had it plugged in to nanocom and no faults are coming up except one about alarm system...cleared that replaced batterys in key and 're synced the key and still not firing up? Please please I'm all out of ideas and running out of patients with it anyone got any fresher ideas
It was cutting out every now and then and not starting again for few hours then all of a sudden it just cut out and never started again
This has no egr and no maf sensor
180k miles on the clock
