MattBrownP38
Member
- Posts
- 23
Trying to change the rad of my diesel p38 but I can't get the bottom bolts to shift. The nut just spins and I can't get anything on it/wedge it
Any ideas?
Matt
Any ideas?
Matt
P38 DSE radiator bottom bolts
- Thread starter MattBrownP38
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Datatek
Well-Known Member
- Posts
- 44,122
- Location
- Near Poitiers SW France
Dremel?
MattBrownP38
Member
- Posts
- 23
Dremel?
howardo
New Member
- Posts
- 6,783
- Location
- In the woods
hand held powertool with accurate cutting attachments
MattBrownP38
Member
- Posts
- 23
Haha i feel like a complete fool! thanks for letting me know,managed to get them off now with a fair bit of swearing involved.
Now having trouble with the viscous fan, got the 32mm spanner on the but but it just turns and turns???
Now having trouble with the viscous fan, got the 32mm spanner on the but but it just turns and turns???
Datatek
Well-Known Member
- Posts
- 44,122
- Location
- Near Poitiers SW France
Take the 4 10mm bolts out and then disassemble it on the bench.
Are you turning it the right way LH thread on the diesel.
Grit Valve
2000 4.6 Vouge
- Posts
- 12,465
- Location
- Plaistow
Data didn't you have trouble getting yours out recently or was that someone else?
Datatek
Well-Known Member
- Posts
- 44,122
- Location
- Near Poitiers SW France
Viscous fan.
ovalandrover
Well-Known Member
- Posts
- 1,591
Data having trouble getting his out ?
It's a combination of age and the cold weather.
and those viscous fans can be pesky buggers as well
Datatek
Well-Known Member
- Posts
- 44,122
- Location
- Near Poitiers SW France
It's a combination of age and the cold weather.
and those viscous fans can be pesky buggers as well
Mainly age
JohnnyCrash
New Member
- Posts
- 1,917
I just smashed the bottom corner off the rad - was coming out as the Rad was cracked anyway so didn't see the need to take it out in 1 piece
