aniesigh
New Member
- Posts
- 49
- Location
- North Devon
sorry to drag this up from the past, but do you have more details on the sealey tool? the item number originally posted no longer comes up,
cheers
cheers
p38 dse dti pump timing cheap solution!
- Thread starter 6704nathan
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 58,170
- Location
- Preston Lancs.
aniesigh
New Member
- Posts
- 49
- Location
- North Devon
the kit mentioned in the first post, not the dti gauge, its the adaptor kit to fit to the pump i am after,
cheers
cheers
- Posts
- 58,170
- Location
- Preston Lancs.
Item number: 250862362999 Ebay. You will also need a DTI if you have not got one and a locking pin.
Irishrover
Well-Known Member
- Posts
- 5,317
- Location
- La Trimouille, Vienne, France
aniesigh
New Member
- Posts
- 49
- Location
- North Devon
that link didn't seem to work but i have already found the dimensions for the locking tool, will turn one up. thanks though 
As for the DTI gauge, i take it a standard one just clamps into the threaded adaptor you kindly supplied a link to? don't need to get a specific type?
thanks again
As for the DTI gauge, i take it a standard one just clamps into the threaded adaptor you kindly supplied a link to? don't need to get a specific type?
thanks again
Irishrover
Well-Known Member
- Posts
- 5,317
- Location
- La Trimouille, Vienne, France
LRT-12-108 Timing Pin - Land Rover Zone
Search this
Search this
Irishrover
Well-Known Member
- Posts
- 5,317
- Location
- La Trimouille, Vienne, France
I tried to post the link again, but you beat me to it !!!!!!
6704nathan
New Member
- Posts
- 339
- Location
- burbage nr marlborough
that ebay link doesnt work anymore to old! was a long time ago that i found that tool but it is still available if you search ebay and look for bosch timing tools and look at the sellers from america.
found the same tool on ebay for another landyzone member about a month ago and yes works perfect.
found the same tool on ebay for another landyzone member about a month ago and yes works perfect.
6704nathan
New Member
- Posts
- 339
- Location
- burbage nr marlborough
a standard dti guage wont fit to big wont fit in the space behind the pump, the dti you need is about half the size of a standard one.
aniesigh
New Member
- Posts
- 49
- Location
- North Devon
Done this now using the USA eBay tools, took around 5 days to turn up, I assumed the dti gauge I got was a standard one :S it's just over 2" diameter. Job done now and it drives a lot better! Lots torquier at low rpm, my pump was set at .65mm so a fair way out!
Cheers all
Cheers all
6704nathan
New Member
- Posts
- 339
- Location
- burbage nr marlborough
glad someone else found it usefull!
jerrytlr
New Member
- Posts
- 307
- Location
- Dordogne, France
What did you use for the locking pin in the end? I have the dial gauge and adapter, but not the pin.... did you have to buy the L/R (or BMW) genuine part?
Cheers
Jerry
Cheers
Jerry
- Posts
- 58,170
- Location
- Preston Lancs.
Lock pin is 130mm long. Major diameter is 11.90mm, pin on end of it is 10mm long, 7.90 mm diameter. Get one made out of silver steel. I have put these dimensions on "How To" thread but they obviously don't trust me, as it's not visible yet.
Last edited:
