P38dseGAV
Active Member
- Posts
- 570
- Location
- Abbey Hay manchester
right had the auto spark out for 2 hrs he wen thru all the wiring and it seems to be the becm that is faulty how do i test that this is the case or is there a way of resting the becm
p38 dse 1995 follow up on non start
- Thread starter P38dseGAV
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Tervueren
New Member
- Posts
- 646
Searching works for me 
Demystifying the BeCM
RANGE ROVER BODY (electrical) CONTROL MODULE (BECM or BCM) PROBLEMS PAGE
Demystifying the BeCM
RANGE ROVER BODY (electrical) CONTROL MODULE (BECM or BCM) PROBLEMS PAGE
Datatek
Well-Known Member
- Posts
- 45,018
- Location
- Near Poitiers SW France
Are you getting an "engine disabled" message on the message centre? Because the only way I can see that the BECM can affect the engine ECU is via the enable/disable handshake. If the engine is disabled then you would have no glowplugs methinks and also no fuel at the injectors.
Maybe you just need to re-synch the key fob.
Others with more knowledge will no doubt say if I'm right or wrong.
rewmer
Well-Known Member
- Posts
- 2,082
- Location
- Clacton, Essex, UK
Can you clarify, does it crank over but not fire?
Last edited:
Rick-the-Pick
Active Member
- Posts
- 782
- Location
- Hove, Sussex.
I read your post on another site.
It is looking like your becm has failed.
It is looking like your becm has failed.
P38dseGAV
Active Member
- Posts
- 570
- Location
- Abbey Hay manchester
engine does not crank has engine disabled on info read out the problem is the becm is not reading the key in the door i e door opening unlock and lock
Datatek
Well-Known Member
- Posts
- 45,018
- Location
- Near Poitiers SW France
Door micro switches, common fault lots of threads on that. Gav is the king of the door lock mechanisms.
P38dseGAV
Active Member
- Posts
- 570
- Location
- Abbey Hay manchester
ive replaced it
P38dseGAV
Active Member
- Posts
- 570
- Location
- Abbey Hay manchester
P38dseGAV
Active Member
- Posts
- 570
- Location
- Abbey Hay manchester
the chap told me the milage has been reset so if thats the case then it should set with my 98k
P38dseGAV
Active Member
- Posts
- 570
- Location
- Abbey Hay manchester
well i have proof of mine being 98k so if i have to i can get it reset
Rick-the-Pick
Active Member
- Posts
- 782
- Location
- Hove, Sussex.
You're not going to change all that are you?
For what you paid for that lot i could of sorted your becm out.
The mileage would of been reset as i the guy who sold it to you contacted me regarding some old becms.
For what you paid for that lot i could of sorted your becm out.
The mileage would of been reset as i the guy who sold it to you contacted me regarding some old becms.
Similar threads
