p38 diesel steering wheel lock

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

dubbleRR

Well-Known Member
Posts
1,018
Location
highlands of Scotland
Hi does anyone know if the steering lock on the p38 ,is electric and controlled by a fuse .The reason i ask is mines stopped locking ,Key goes in and it turns n starts but pull out the key and no click from steering lock ....Cheers ,,RR
 
Hi does anyone know if the steering lock on the p38 ,is electric and controlled by a fuse .The reason i ask is mines stopped locking ,Key goes in and it turns n starts but pull out the key and no click from steering lock ....Cheers ,,RR
It's mechanical. Get some Graphite powder to lubricate it.
 
Spray some electrical contact cleaner in there and wiggle the key about a bit let dry then some graphite powder as Datatek mentioned and jobs a goodun.:)

do not use wd40 as a lot do it gums it up
 
Hi again ,steering locks working again (in a fashon) If when i take the key out the middle metal bit supposed to pop out ,and the lock goes on ,mine sticks ,but if i push it wi me finger ,out it pops :eek::D..gave it a good spray wi contact cleaner ,now just waiting for graphite dry oil stuff to turn up ...so if yer locks sticking ,poke it wi yer finger,:rolleyes:,,cheers ...RR
 
Mine did the same as yours, and used the finger trick, I was told to use graphite, about 3 years ago, its been fine since
 
Back
Top