P38 amp cable fitting

anyone fitted a sub n amp in thier range, id like to know best place to route the power cable from the battery, or can i use the becm 12v feed to the right of the fuse box??????

its a 1200watt monoblock amp im powering

i put a sub and amp in mine after the hk one decided to blow up, you can route the cable from the battery along the inside edge back towards the bulk head where a gromet is, poke the wire through the gromet into the inner arch then back a bit further you can get back into the car by going through the same gromet as the side repeater wires then its just a case of taking the trims of a running the the cable through through to the back.

swwrob said:

can i use the becm 12v feed to the right of the fuse box??????

Click to expand...

You should be ok using the front post on the BECM, as I've run all my rear leccy stuff off it, (inverter,split charger,sockets, etc.) and it saves havin to run all the way from the battery, just make sure you use an inline fuse. Although your amp is rated to 1200w it's never gonna use all that, the car'll vibrate into heap before you get there!!