StuckAgainSteve
Well-Known Member
- Posts
- 2,276
- Location
- London
Just put another knackered engine in, why waste a good one on the sort of tosser that drives around with no oil in their sump? :behindsofa:
p38 6 pot, knocking & smoking plus story
- Thread starter nrgserv
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Datatek
Well-Known Member
- Posts
- 43,949
- Location
- Near Poitiers SW France
Just swap the pump top, there are threads that cover doing it.
nrgserv
Well-Known Member
- Posts
- 4,208
- Location
- shipley, west yorks.
cheers, read a good few of them and its still an open option.
discussing complete motors at mo with a view to swapping engines and selling off / scrapping the rest. (bout 8 on the bay, watching the prices)
maybe some p38 bits coming up
nrgserv
Well-Known Member
- Posts
- 4,208
- Location
- shipley, west yorks.
ok, update.
picked a second hand engine up from emmots of colne last saturday, which was an epic in its self.....
road blocked between glusburn and colne with drifts and wagons, 3 coppers in a new disco tryin to drag them out with a ratchet strap......
loaned the tow ropes and assisted, got the road clear and carried on!
engine fitted, oiled up, and finally tested yesterday morning. sounded sweet but when the clutch was tried it was solid.
removed slave, tried clutch arm with a lump of scaff tube, (had done this first after lining it all up to make sure it was working), pulled arm, heard bearing pull out of clutch plate. ####.
gearbox now on floor, new clutch collected last night, refit today. hopefully.
off on the school run, be back later......
picked a second hand engine up from emmots of colne last saturday, which was an epic in its self.....
road blocked between glusburn and colne with drifts and wagons, 3 coppers in a new disco tryin to drag them out with a ratchet strap......
loaned the tow ropes and assisted, got the road clear and carried on!
engine fitted, oiled up, and finally tested yesterday morning. sounded sweet but when the clutch was tried it was solid.
removed slave, tried clutch arm with a lump of scaff tube, (had done this first after lining it all up to make sure it was working), pulled arm, heard bearing pull out of clutch plate. ####.
gearbox now on floor, new clutch collected last night, refit today. hopefully.
off on the school run, be back later......
nrgserv
Well-Known Member
- Posts
- 4,208
- Location
- shipley, west yorks.
back together, runs and drives good.
reckon i sprained the clutch springs ragging the engine out first time round unaware it uses a pull clutch.
should have read manual before starting.......
reckon i sprained the clutch springs ragging the engine out first time round unaware it uses a pull clutch.
should have read manual before starting.......
No idea what you are talking about
But good news that its going again. You going to that Skipton thing tomorrow
