Branston
New Member
- Posts
- 13
- Location
- Batley, West Yorkshire.
Hi all, not needed the transfer into low range for a good while and when I came to do a change it would not happen, so. When the H gate was moved to Lo Neutral. amber lights flashed and alarm sounded, after about 10 sec's the "Select Neutral" appeared on the dash display.
Checked all the fuses, all OK. Put Fuse No 11 in nothing. Removed ratio motor and tested with 12v - runs both ways with ease. Gripped Transfer box change shaft with fingers and the rotation from Hi to Lo was easy and smooth. Plug/socket clean and good connection. Where to look next.
Is it the Ratio motor s/w's. is it the Transfer box ECU, or anything eles that I may have overlooked.
As an aside the Transfer box and the gears in Hi range are all as soomth and quite in operation whether being gentle or giving it some stick.
Is there anyone out there who can point me in the right direction?
Thanks in anticipation. Chris
Checked all the fuses, all OK. Put Fuse No 11 in nothing. Removed ratio motor and tested with 12v - runs both ways with ease. Gripped Transfer box change shaft with fingers and the rotation from Hi to Lo was easy and smooth. Plug/socket clean and good connection. Where to look next.
Is it the Ratio motor s/w's. is it the Transfer box ECU, or anything eles that I may have overlooked.
As an aside the Transfer box and the gears in Hi range are all as soomth and quite in operation whether being gentle or giving it some stick.
Is there anyone out there who can point me in the right direction?
Thanks in anticipation. Chris