P38 1997 4.0SE clock bulb replacement

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
P38 Monkey

P38 Monkey

Well-Known Member
Posts
638
Location
Cambridge
Clock not illuminated so I thought it best to remove and check the bulb.
The manual says take off the centre console side panels and remove the whole switch panel.
The clock appears to be fixed via the rear of the switch panel..??
What a pain - is there no other way to get the clock out??
 
P38 Monkey said:
Clock not illuminated so I thought it best to remove and check the bulb.
The manual says take off the centre console side panels and remove the whole switch panel.
The clock appears to be fixed via the rear of the switch panel..??
What a pain - is there no other way to get the clock out??
Click to expand...
If you have small hands, it might be possible through the radio opening if you take out the radio.
 
Datatek said:
If you have small hands, it might be possible through the radio opening if you take out the radio.
Click to expand...
I need to take out the radio anyway, to connect a bluetooth input. Looks like it will them be a task for my good lady wife.
Thanks for the suggestion, as ever.
 
P38 Monkey said:
I need to take out the radio anyway, to connect a bluetooth input. Looks like it will them be a task for my good lady wife.
Thanks for the suggestion, as ever.
Click to expand...
If you can release the latch on the radio side of the clock, you can ease that side forward then try to get a finger round to the other side.
 
The storage cubby above the radio pulls out (with care), then you can access the clock bulb.
 
The cubby has to come out together with the switch panel. It's one moulding (well it was on the two I modified for 7" screens.)



1687165792172.png
 
pwood999 said:
The cubby has to come out together with the switch panel. It's one moulding (well it was on the two I modified for 7" screens.)



View attachment 290936
Click to expand...

It was seperate on mine, 2000 my, maybe the construction was changed at some point.
It seems it was the cubby on later models with the sat nav option.
 
Last edited:
You must log in or register to reply here.

Similar threads

W
1997 Defender hazard switch bulb replacement.
Replies
13
Views
640
Wolf Pack
W
M
RR p38 HSE 4.6 1996
Replies
9
Views
1K
Datatek
Datatek
P
Deployable sidestep sized to bracket
Replies
2
Views
560
PTMADRID
P
S
Disco 1 Disco 1 Rust repair prep
2
Replies
20
Views
2K
sv_dOnut
S
G
P38 4.0 v8 Automatic goes into low range all on its own
Replies
9
Views
1K
Datatek
Datatek
Back
Top