p38 1995 2.5 diesel air bag suspension help

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

roddy4

New Member
Posts
664
Location
banbury,oxfordshire
somebody please help,i am in the middle of doing 3 of my airbags 1 is new,i am doing the back 2,and the n/side front,please tell me how to go about draining the air down, the vehicle is on blocks at present i am starting at the n/side front corner.
any help would be greatly appreciated.
 
thanks nathan,is that it just give them a pull,no need to try and lift a collar or anything just a good tug and away i go,sorry never done one before so it is a bit alien,cheers for pointing me the right way
Push the pipe and press the collar in hold it in and pull the pipe out
 
thankyou very much for that,i take it doing these are nothing new to you,i have never done these before so am being cautios,is that the same process for the air bags?just push in the air pipe and press on the collar.
Yes... same as.... take ya time u'll be fine
 
When I replaced my airsprings it took a quite a few attempts to get the airline to disconnect from the airbag. I almost gave up on the first one but eventually it came out. The next two came out easily but the last one again took several goes.
Hope this helps.
mikeateves
 
Back
Top