P38A Opening and cleaning height sensors

Hi guys, quick question: is there an earlier post or sticky that shows how to open one of these up? They seem fairly well built and I'd prefer not to damage the sealing. One of mine you can just about hear a slight rasp like there might be some dirt particles inside so would like to do some preventive maintenance if I could.

I have them out because car's up on blocks anyway while I replace all the bushes.

Cheers!

I asked this some years ago and have to say after having a fiddle, forget it!

Well that's a shame. I'm sure someone knows, there's plenty of threads about worn tracks and switching sides and so on. Fingers crossed!

There was some link posted last week about swaping them over

Can't be done without destroying them.

Got it. Thanks again, all!

Tony e said:

There was some link posted last week about swaping them over

Click to expand...

From MY 1997 on, they can be swapped side to side to use a clean part of the track. Before that they could not be and a new corner dedicated sensor was needed.

wammers said:

From MY 1997 on, they can be swapped side to side to use a clean part of the track. Before that they could not be and a new corner dedicated sensor was needed.

Click to expand...

The EAS god has spoken