Disco 1 Oops I did it again...

No, I've not become an american singist...
I've done the exact opposite of what people say I should.
I've fitted the soft dash from a RRC, I've fitted twin turbos and now,

I've fitted the entire EAS system from a Classic Vogue SE along with the electric memory heated leather seats.
I'm wondering if there are any other twin turbo v8 discovery 1s on air suspension out there?

Get some pictures up of that

I will do. Photobucket is having a tissy at the moment.
I thought it would be a fairly involved job. I wasn't wrong. I ended up cutting the floorpan out of an RRC as my 300 series discovery apparently had a 200series floorpan.
I had to completely strip the RRC loom and de splice both the EAS and memory seat looms and then splice them into my Disco loom.
Thankfully the chassis had the holes for the height sensors... but that was all. I had to use the front axle from the rangerover and create mounts on the radius arms for the sensors and brackets on the chassis for the reservoir and valve system.

[/URL]
so far that's all it will let me load...

Why?

Because everyone does the exact opposite and I'm obtuse.

I wanted ride height levelling - i often carry heavy loads in the boot.
I wanted it higher offroad, I don't like grounding out.
I wanted it lower on road, it's a bit fast to be too high
I wanted a more comfortable ride. Britpart HD springs are a little firm...
I wanted the computer to be able to sort all of that out for me

[/URL]

[/URL]
[/URL]
[/URL]
ml][/URL]

[/URL]
[/URL]

I want to see what lies beneath the bonnet

[/URL]
[/URL]

Looks like it'll keep you busy for a while! You do realise we'll need regular updates with pictures from now on? And a video when it's running

im afraid that's an old pic, She's been running the twin turbos for a year now. This is her tonight earning her keep.
[/URL]