P38dave
Member
- Posts
- 96
- Location
- Moor row cumbria
After replacing the leak off pipes my rangie is still stupid at starting. Iv heard about the 1 way valve mod an as their so cheap I might as well try it. But where in the fuel system do you fit it?
One way valve
- Thread starter P38dave
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 58,170
- Location
- Preston Lancs.
One way valve is a waste of time, but if you must in the line just before the filter.
if i was you i would save your money as i bought my rangie a year ago and it is fitted with a one way valve and fuel still manages to flow back to the tank apparently its the two pipes on top of the intank fuel pump that are metal and they corrode and get pin holes in then air then gets in and draws the fuel back into the tank thats what i have been told i am going to atempt to chane mine see if that cures it and lob that one way valve in the bin
Soloby Rob
Banned
- Posts
- 7,714
- Location
- In a house, not far from somewhere
- Posts
- 58,170
- Location
- Preston Lancs.
You will really come into your own when the Mods start an "How not to" section.
P38dave
Member
- Posts
- 96
- Location
- Moor row cumbria
It's sorted now without the one way valve it was the pipe from the filter to the pump must have had a pinhole in it.
If you're going to keep the car it's worth adding dropping the tank to your list. There are some metal pipes and joints on top that do corrode.
Datatek
Well-Known Member
- Posts
- 43,984
- Location
- Near Poitiers SW France
Stumpy is back still looking for his fecking legs no doubt
