ok so what am I missing

Whitey1973 · Dec 22, 2010

I have just bought a 2004 Disco Landmark and after reading on here how easy it is I have bought all the bits for cruise control so thats the blank switch on the right of the clocks sorted but I still have a blank on the left so whats missing lol
what should be there its the third one down I think
any ideas

50 pence · Dec 22, 2010

I think its the parking sensor switch !.

Del.

thought it was mine! · Dec 22, 2010

front aux driving lights? trying to remember wats on mine to cold to have a look

squizzel · Dec 22, 2010

I have an Es model and the switches on the left are from top to bottom, front driving lights, rear fogs, a blank then the parking sensors.
Mark

Whitey1973 · Dec 22, 2010

squizzel said:
I have an Es model and the switches on the left are from top to bottom, front driving lights, rear fogs, a blank then the parking sensors.
Mark

This is the same as mine, so we think the third down should be aux lights?

biggeeeee · Dec 22, 2010

51 plate ES only has 2 switches - front and rear fog lights
checked the handbook and there are 2 spares on that

thought it was mine! · Dec 22, 2010

1 rear fogs
2front fogs
3 aux spots
4 blank
hope this answers question went out in cold for you lol

Whitey1973 · Dec 22, 2010

thought it was mine! said:
1 rear fogs
2front fogs
3 aux spots
4 blank
hope this answers question went out in cold for you lol

cheers for that
mine is
1 rear fogs
2 front fogs
3 blank
4 parking sensors

this is my second TD5 and there are few strange things about the speck, leather seats but not heated of electric, electric sunroofs but no sunroof blinds, cd multi changer plus the audio controls in the back, no cruise control(yet) just seems that somethings are quite high spec and other like not having any blinds on the sunroofs are quite basic?
its a bit strange

biggeeeee · Dec 22, 2010

If you have a copy of Microcat you can check to see what was fitted to your Disco when it left the factory all you need is reg no. or chassis no.

Whitey1973 · Dec 26, 2010

right following on in this thread I have found an aux light switch for this side I have pulled the switch out but no connectors attatched does this mean if I want to fit a set of spots on the front it would be quite a task to marry them in with this switch, am I better just connecting the new front spots to the main been.
what have other people done?

barczyk · Dec 26, 2010

Wired my spots from the main beam and then put a proprietory switch inside. This way you by-pass the BCM so don't have to pay a dealer to activate them through text book

sierrafery · Dec 26, 2010

Whitey1973 said:
... if I want to fit a set of spots on the front it would be quite a task to marry them in with this switch,....

that's what i'd do

ok so what am I missing

Whitey1973

Member

50 pence

New Member

thought it was mine!

New Member

squizzel

New Member

Whitey1973

Member

biggeeeee

Retired - Living the dream

Attachments

thought it was mine!

New Member

Whitey1973

Member

biggeeeee

Retired - Living the dream

Whitey1973

Member

barczyk

Active Member

sierrafery

Well-Known Member

Similar threads