callisr
Well-Known Member
- Posts
- 615
- Location
- Burton-on-Trent, Staffs
Hi all
I am going into battle against the small but annoying leaks on my ex mod 2.5 nad engine.
I appear to have oil coming out of the lift pump lever spindle (as well as its gaskets to the block) and thought I would mend it with a new pump. However, I am getting confused as to what pump I need to get. Some come with spacers and pipe adapters (these seem to be britpart ones) and others don't. I would prefer a Delphi or similar but will I still need a spacer?
It was never this difficult on the series truck!
The second niggly leak is from the filter head to block mating face. Can this be done without removing the pipes from the injection pump?
Cheers all and sorry for all the dumb ass questions!
Rich
I am going into battle against the small but annoying leaks on my ex mod 2.5 nad engine.
I appear to have oil coming out of the lift pump lever spindle (as well as its gaskets to the block) and thought I would mend it with a new pump. However, I am getting confused as to what pump I need to get. Some come with spacers and pipe adapters (these seem to be britpart ones) and others don't. I would prefer a Delphi or similar but will I still need a spacer?
It was never this difficult on the series truck!
The second niggly leak is from the filter head to block mating face. Can this be done without removing the pipes from the injection pump?
Cheers all and sorry for all the dumb ass questions!
Rich