htr
Well-Known Member
- Posts
- 1,515
- Location
- Central Otago, Southern New Zealand
I want to fit an oil pressure and an oil temp' gauge to my FL1 with the 1.8 petrol motor. I see that the oil filter mount has a take off point for the oil light switch. If I fit a T adaptor I can mount the sensors for the existing oil pressure light switch and my oil pressure gauge. But where to Fit my oil temp' sensor?
On the very left of this image is where the OE sensor screws into. However there appear to be two [possibly threaded] holes on the neck just to the left of where the oil filter canister screws on. I guess they are plugged or blanked off at casting. Could these be used to thread in a sensor/ probe for oil temp'?
Advice please.
On the very left of this image is where the OE sensor screws into. However there appear to be two [possibly threaded] holes on the neck just to the left of where the oil filter canister screws on. I guess they are plugged or blanked off at casting. Could these be used to thread in a sensor/ probe for oil temp'?
Advice please.