I have the 200tdi disco lump sat in my 1986 Defender 90. I noticed that the oil cooler pipes were seeping quite a lot so ordered the replacement parts for the defender 200tdi, but to my dismay I found that one of the pipes (PBP101140) was way too short and was missing a right angle fitting, the other part (PBP10130) appears to look like it will fit.
I had a look in a parts catalogue,and annoyingly there are only pictures on the PBP101130/40 pipes and there are a few variations for the disco 200tdi. Now I wanted to know if anybody knew the part number for the bit I was after which is basically looks the same as PBP101130 but for the bottom of the cooler.
Hope this makes sense, thanks in advance for any help, this is proving a nightmare for me!
I had a look in a parts catalogue,and annoyingly there are only pictures on the PBP101130/40 pipes and there are a few variations for the disco 200tdi. Now I wanted to know if anybody knew the part number for the bit I was after which is basically looks the same as PBP101130 but for the bottom of the cooler.
Hope this makes sense, thanks in advance for any help, this is proving a nightmare for me!
