Odd light problem

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Richtd4es

Richtd4es

New Member
Posts
56
Location
Hampshire
Hi chaps,
your help please ,my headlights are odd :mad: , i mean the N/S one is dimmer than the O/S on full beam and dip, i have the up rated bulbs (osram) fitted.

I have swapped the bulbs round,still the same
checked the headlights for a number dif on the glass ,same each side

So i need to go further ,Relays? Earth?
what do you think guys

Thanks for looking
richtd4es
 
Richtd4es said:
Yes i gave it all a good wiggle but no joy

where are the earth points on the td4 lights then

thanks richtd4es
Click to expand...
earth we always have problems wiff earth un earthlings fink youll find its not called earth [yer have rubber tires] ok its slang but its really -ve or negative or in mondos case cathode. . . .:eek:
 
:) This is a common problem, not just on Freelanders though.
Your problem is almost certainly a poor earth connection either at the headlamp connector (check also for signs of corrosion ) or the multi clinch block (there is one on the o/s bulkhead to the left of brake servo, as viewed from front of vehicle,white plastic connector, all wires are BLACK.)
 
Sorted

Many thanks to all that helped with this
Problem was a loose clintch point
not on the off side one but near side just, by the Battery
just tightened the 10 mm nut and all was back to normal

Now how do i get the off side light lifted up a bit
cant find an adjuster ?

just trying to improve the driving experience at night

yours
richtd4es
 
mondo
thanks

Got the ES as well
the thumb thing is on max setting eg at the top setting

my problem is the off side light is a lot lower than the near side
even on full beam

so it must be adjusted wrong? NO?

any help appreciated

richtd4es
 
If yer look down the light from the top, you should see a grey shaft stickin out, where that pokes thro the black casing there's wot looks like an allen screw with a cross at the bottom of it.
bet thats yer adjuster !
cant see out else that would move, so try givin it a twiddle !;)

dunt growl at me if it aint tho!:eek:
 
Yep thems the ones !

sept the one i wer talkin of is the horizontal adjuster !
the one you need is under the slam panel,
Supposed to be a hole to poke the allen key thro !
but there int a hole on mine ?????
 
You must log in or register to reply here.

Similar threads

s8ndst0rm
LED Full Beam - Very weird situation
Replies
17
Views
1K
Rallymantony
R
M
Td5 110 SW brake lights
2
Replies
21
Views
973
mystery
mystery
Freddie17
Freelander 2 (LR2) Front suspension clunk and judder (SOLVED)
2
Replies
36
Views
2K
Freddie17
Freddie17
Hexonxonx
Series 2 RH rear flasher not flashing
Replies
9
Views
1K
Hexonxonx
Hexonxonx
J
td5 non start - No fuel pump power, No ecu Light, Nanocom cant communicate with ecu
Replies
8
Views
706
Stanleysteamer
Stanleysteamer
Back
Top