Nut and Bolt size required, rear of prop

willf · Sep 12, 2010

Any one know the size for the 4 bolts on the rear of the rear prop going into the diff changing gear box and just can't get it out without moving this and i'm scared i'm gonna round em off with a 14mm. Front ones had all been replaced and where metric (and loose!)
Thank you

Beneagles · Sep 12, 2010

Most probably 9/16

hughesy · Sep 12, 2010

9/16 AF but 14 mm usually fits too.

willf · Sep 12, 2010

cheers folks. i'll go get a couple of 9/16s then, if that don't work i'll have to try an beg an impact gun! I've got all the way in, floor, seats, seat box, hand brake, box mounts, steering wheel, the lot all off and not on seized bolt! Then at the last hurdle i'm stuffed!

Nut and Bolt size required, rear of prop

willf

Member

Beneagles

Well-Known Member

hughesy

Well-Known Member

willf

Member

Similar threads