P38A Not turning over

Found the post but i am sure the were others
https://www.landyzone.co.uk/land-rover/dashboard-removal.346556/page-3#post-4578512

I plugged it in to see I’ve I had ti recync the becm to ecu maybe that caused the not turning over problems will have another try at it today I’ve I jump the relay again to the starter would it hurt to leave it running a short while

The bloody things beat me going back to work Monday replaced nearly all underneath stripped out the inside new interior to go in dash out heater matrix replaced going to get a mobile auto electronics mechanic to come and sort it out I’ve got the nanocom so hopefully can get her running

pete12345 said:

I plugged it in to see I’ve I had ti recync the becm to ecu maybe that caused the not turning over problems will have another try at it today I’ve I jump the relay again to the starter would it hurt to leave it running a short while

Click to expand...

GEMS has an autolearn. Diesel has to be programmed. Thor might be the same as the diesel.

Thor has learn code but you can also copy it as well manually I think