Disco 2 Non starter

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
D

Deano td5

Member
Posts
10
Location
Birmingham
Hi can any one help me plz ,my disco 2 will turn over but not start,the glow plug light not working no temp gauge m&s lights flashing I've found out that I have no power going to F1 or F2 fuse in engine fuse box,does any now what could be the problem, it's had a new ignition barrel, replaced internal fuse box & I've had ecu & bcu checked, any help will stop me going mad
 
Hi. Replace relay R9 or swap with R8(heated screen) for test then if no joy push on the inertia switch on the firewall, if still no joy unplug it and bridge the terminals in the plug and try... if nothing of these helps we'll speak again
 
sierrafery said:
Hi. Replace relay R9 or swap with R8(heated screen) for test then if no joy push on the inertia switch on the firewall, if still no joy unplug it and bridge the terminals in the plug and try... if nothing of these helps we'll speak again
Click to expand...
Hi I've tryed that no good, I've put a wire from F1 to positive on battery it will start once I remove the wire it won't
 
Check fuse F13 engine bay and if it's good you should rule out an interruption on the inertia switch's circuit but for that you have to remove the engine bay fusebox...do you have RAVE?
 
Your description there does suggest a problem with or around the main relay and the inertia switch. The only device between the main power and F1 and F2 is the contact of the main relay R9.

Untitled.gif
 
sierrafery said:
Check fuse F13 engine bay and if it's good you should rule out an interruption on the inertia switch's circuit but for that you have to remove the engine bay fusebox...do you have RAVE?
Click to expand...
Hi thanx for that but what is RAVE, I've replaced the engine fuse box so I thought the problem must be before the fuse box
 
sierrafery said:
the manual which contains everything you need for a troubleshooting cos i can guide you but you need the connector views so download and install disc 1 http://www.myrangerover.co.uk/rave-workshop-manual/ then when you can access the Eletrical library - connector views come back and i'll tell you more
Click to expand...
Hi thanx for that I work away all WK so can only look at my Landy on Saturday's, I'll down load & try that nxt WK, will let you now how I get on
 
sierrafery said:
the manual which contains everything you need for a troubleshooting cos i can guide you but you need the connector views so download and install disc 1 http://www.myrangerover.co.uk/rave-workshop-manual/ then when you can access the Eletrical library - connector views come back and i'll tell you more
Click to expand...
Hi mate I've found two broken wires in the n/s inner flitch white & green and a brown one, repaired them and it all seems to be working fine now fingers crossed, thank you for all your help
 
You must log in or register to reply here.

Similar threads

PieterLV
D2 V8 not starting
Replies
6
Views
552
PieterLV
PieterLV
Ashs1
D2 v8
Replies
11
Views
1K
sierrafery
sierrafery
StuRox
Disco 1 Interior Light door switch wiring
Replies
11
Views
639
GIlbert114
G
MAF Diver
Disco 2 Nanocom/RAVE manual is wrong: adjusting windows after removing key and opening a door?
Replies
4
Views
520
MAF Diver
MAF Diver
T
Central locking not working on all doors except drivers
Replies
6
Views
861
Stanleysteamer
Stanleysteamer
Back
Top