wellskelptedface
New Member
- Posts
- 7
- Location
- scotland
Alright guys wee bit of advice needed
So my L320 (facelift) need to replace my old compressor as getting "standard height" and "reserve not filled in time" messages. I have the original Hitachi type so want to replace it with new AMK type at suggestion of my LR garage. Finances just cannot really stretch to the normal LR one even throught would not normally even think of anything else but it also need belts done so willing to fit a ebay/amazon one to get me by just now and allow me to get through MOT in month or so. I know this is a bit of a crapshoot but anyone experience of one that will even get me through for a while. I will be getting the garage to fit it while in for belts and get old one back to see if can refurb it and then maybe put back in when cheapo fails. Also just want to check would I just need the compressor or would I need some sort of kit, I do know that software will need updated by my LR garage will do that when fitting
So just wondering if anyone has a cheapo that has worked and the supplier they used. Not holding anyone to it just wanted a wee point in right direction would be good if not will prob just pick something.
Cheers guys
So my L320 (facelift) need to replace my old compressor as getting "standard height" and "reserve not filled in time" messages. I have the original Hitachi type so want to replace it with new AMK type at suggestion of my LR garage. Finances just cannot really stretch to the normal LR one even throught would not normally even think of anything else but it also need belts done so willing to fit a ebay/amazon one to get me by just now and allow me to get through MOT in month or so. I know this is a bit of a crapshoot but anyone experience of one that will even get me through for a while. I will be getting the garage to fit it while in for belts and get old one back to see if can refurb it and then maybe put back in when cheapo fails. Also just want to check would I just need the compressor or would I need some sort of kit, I do know that software will need updated by my LR garage will do that when fitting
So just wondering if anyone has a cheapo that has worked and the supplier they used. Not holding anyone to it just wanted a wee point in right direction would be good if not will prob just pick something.
Cheers guys
