Looking into buying a Land Rover but it seems a bit of a minefield! How important is it to have a VIN on the chassis? If a chassis is galvanised will it loose its VIN? I understand that if you replace the chassis and show evidence the old one was destroyed it is ok, but what about if the original chassis looses its VIN during repairing. Also, looking at the rules surrounding radically altered vehicles, would a series 3 built before the rules came in (1998) be exempt? Thanks.
Newbie VIN Question?
- Thread starter D9000000
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Hicap phill
Well-Known Member
- Posts
- 16,338
- Location
- Wiltshire
Chassis number missing on galv chassis is normal. You should have a metal plate with vin number on it.
Next ask if they have a receipt for the new chassis & any build photos.
if your going to be looking at a series 3 on coils it’s probally a cloned/stolen 90.
Next ask if they have a receipt for the new chassis & any build photos.
if your going to be looking at a series 3 on coils it’s probally a cloned/stolen 90.
There are photos but no receipt because it was the original chassis repaired and galvanised. Seems all very original but I don’t really know what I’m looking for. I’ll get an expert out.
Hicap phill
Well-Known Member
- Posts
- 16,338
- Location
- Wiltshire
so it’s a leaf spring chassis?
if the VIN matches the plate with VIN (engine bay?) but the chassis doesn’t have one is it still alright?
So if the dumb iron is not replaced the number on the chassis should still be there? Could shot blasting and galvanising actually get rid of the stamp which is deeply stamped into the chassis?
Thanks. This is where I’m not sure. How would you tell a leaf spring chassis? Another Pre defender LR I’m looking at has supposedly rebuilt axels with discs Instead of drums - does that sound dodgy?
The vin plate thats pop rivited to the body means it matches the logbook...
However the vin number indicates the year,type and fuel it left factory with...that is what I meant...If the chassis has no number you need to dig deeper
No. almost normal to upgrade in this manner.
Have a nosy here:-
https://en.wikipedia.org/wiki/Leaf_spring
And for Coil springs:-
https://en.wikipedia.org/wiki/Coil_spring
No. almost normal to upgrade in this manner.
Have a nosy here:-
https://en.wikipedia.org/wiki/Leaf_spring
And for Coil springs:-
https://en.wikipedia.org/wiki/Coil_spring
oh, it definitely has coil springs then... that seems to be a bad sign?
IMHO, better to ask on here - It's cheaper
, and you'll get a bit of banter thrown in anorl +1 - which is why this forum is the place to ask such questions
Possibly - we need to know more - it could be a series based vehicle on a Designa chassis - get some pictures, upload them to here, and we'll all take the p*ss
.... sorry , give you good advice Possibly - we need to know more - it could be a series based vehicle on a Designa chassis - get some pictures, upload them to here, and we'll all take the p*ss
ok sounds great!!!
+1 - which is why this forum is the place to ask such questions
I understand the designa chassis wouldn’t be the original. The problem is the seller claims it is original chassis without VIN, but it has coils... I am confident enough engine is original though so really unsure what to think about it at the moment. I’ll dig deeper...
Bobsticle
De Villes Advocaat
- Posts
- 27,632
- Location
- Manchester
Good job your not looking at a series 2. Some of them didn’t have the number on the chassis from new
I wouldn’t think for one moment it was built with coils. If it was the young farmer would have had 90 panels on it in a thrice to lure young milkmaids with his modern wheels.
I wouldn’t think for one moment it was built with coils. If it was the young farmer would have had 90 panels on it in a thrice to lure young milkmaids with his modern wheels.
Henry_b
Think outside, no box required.
- Posts
- 15,509
- Location
- somewhere else
Good job your not looking at a series 2. Some of them didn’t have the number on the chassis from new
I wouldn’t think for one moment it was built with coils. If it was the young farmer would have had 90 panels on it in a thrice to lure young milkmaids with his modern wheels.
You doing that with yours?
Yes you're going to have to post a load of pictures and let us see what you're talking about. The series number should be towards the front of the dumb iron , the defender one is slightly further back more hidden by the tyre.
Also pics of the interior, suspension and bodywork.
Also pics of the interior, suspension and bodywork.
