Newbie from lincs

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
P38lad

P38lad

Member
Posts
20
Location
Sutton Bridge
Evening all, thanks for letting me join. I picked up a '96 2.5 dhse p38 a few weeks ago which needed a injector pump, which I have now brought and fitted and got the motor running, although it be a bit rough and knocking (injector knock). I'm hoping if and when I need any advice I can turn to this forum for it.

Cheers for now, barry
 
Hello and welcome:)
If its sounding a bit knockey the timing could be out did you time it using a dial gauge for pump lift, it is the only way to set it up right.

but best to do tech stuff in the range rover section of the forum.
 
I did check the chain and seems tight. I never timed it as thought using the M51 fuel pump removal tool the timing would be OK. I will have to get the garage to come look.

The only picture I have at the moment is the one in this post. I will be planning on getting more soon after I've replaced a few bits.
 

Attachments

  • IMG-20191124-WA0001.jpg
    IMG-20191124-WA0001.jpg
    292.9 KB · Views: 98
  • IMG_20191207_164754.jpg
    IMG_20191207_164754.jpg
    122.4 KB · Views: 140
I belive its oe, all stamps are the same as the old one.

All runs, it did take a few cranks to get it to fire along with a bit of sniff to get it to fire up.

Im going to see what work is like this week and get it loaded on the trailer and taken to the garage to get the fuel pump timed
 
No mot, and it don't seem to drive.

It starts up and runs, but when you select drive or 1st (automatic) it just stalls.
I am working my way though the threads in the range rover section see if anyone else has had the same problem, before asking.
 
No mot, and it don't seem to drive.

It starts up and runs, but when you select drive or 1st (automatic) it just stalls.
I am working my way though the threads in the range rover section see if anyone else has had the same problem, before asking.
 
It’s pretty quiet lately, make a new thread in RR section. There’ll be banter and we go off on a tangent but no doubt will get to the answer fairly quickly.
Might be worth dropping the autobox oil to see what’s in there, you’d have to look up filling procedure as is not fill and go. The lads will know for sure.
 
RangeRoller dt said:
It’s pretty quiet lately, make a new thread in RR section. There’ll be banter and we go off on a tangent but no doubt will get to the answer fairly quickly.
Might be worth dropping the autobox oil to see what’s in there, you’d have to look up filling procedure as is not fill and go. The lads will know for sure.
Click to expand...
Nice one thank you buddy
 
You must log in or register to reply here.

Similar threads

Shannon Sprout
Newbie Sprout
Replies
4
Views
589
brianp38dse
brianp38dse
1
Yet another newbie,
Replies
6
Views
844
18Wheeler
1
F
Hi from Peru!
Replies
6
Views
629
brianp38dse
brianp38dse
DucatiRick
FL1 in Ontario Canada Differences from FL2?
Replies
3
Views
365
brianp38dse
brianp38dse
T
Hello from the Scottish Highland.
Replies
5
Views
1K
WhiskyLassie
WhiskyLassie
Back
Top