Series 2 New tow socket and indicators buzzing

cornish rattler

Well-Known Member

Posts

6,432

Location

Manc chester

• Nov 18, 2019

• #1

Hi guys
Was hopeing to get a much needed tip run done today but had to fit a new tow socket with new 7 pin cable first as i hadn't fitted it yet, the landy has LED lights with LED flasher unit and my trailer has none LED lights all lights work fine but all indicators on landy and trailer don't work but has a constant buzz when the indicators are switched / turned on if i disconect the plug from socket the indicators on the landy work fine, any idea's please

 

C

Colthebrummie

Well-Known Member

Posts

9,870

Location

Thatcham

• Nov 19, 2019

• #2

If the flasher unit is an electronic one for LED lamps, it won't work with ordinary bulbs, you need to change the trailer bulbs to LED too.

Col

 

R

rob1miles

Well-Known Member

Posts

3,565

Location

Slough and Bath

• Nov 19, 2019

• #3

I had this the other way around, could not get a mix of LED and normal bulbs to work, had to change back to normal bulbs. Also had problems with the stop/tail as the LED bulbs had some kind of internal circuit that messed up when the triailer was connected, I never got to the bottom of it.

 

cornish rattler

Well-Known Member

Posts

6,432

Location

Manc chester

• Nov 19, 2019

• #4

Colthebrummie said:

If the flasher unit is an electronic one for LED lamps, it won't work with ordinary bulbs, you need to change the trailer bulbs to LED too.
Nice one i had in idea it was that but wasn't sure

Col

Click to expand...

 

cornish rattler

Well-Known Member

Posts

6,432

Location

Manc chester

• Nov 19, 2019

• #5

Colthebrummie said:

If the flasher unit is an electronic one for LED lamps, it won't work with ordinary bulbs, you need to change the trailer bulbs to LED too.

Col

Click to expand...

Sorry had to re- do my post, yeah i had an idea it was that but wasn't sure