New to Nanocom Evolution II

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
tony2

tony2

Active Member
Posts
351
Location
Near Taunton Somerset
Evening all,

Received my Nanocom Evolution II today and have been having a bit of a play. All it came with was a single A5 sheet "Quick Setup Guide V 1.1".
Went onto Nanocom Website, obtained unlock codes and entered into device ok.
Have looked at the on line User Guide which tells you the basics but have been unable to find anything that explaines the various functions available on the device and what you can and can't do with it. It's all probably very straight forward but, I don't like messing with anything I don't fully understand.
Is there anyone on the forum who knows this device well and could answere a few questions for me please, or, anyone in my area who could give a demo of the various functions........Thanks.
 
tony2 said:
Evening all,

Received my Nanocom Evolution II today and have been having a bit of a play. All it came with was a single A5 sheet "Quick Setup Guide V 1.1".
Went onto Nanocom Website, obtained unlock codes and entered into device ok.
Have looked at the on line User Guide which tells you the basics but have been unable to find anything that explaines the various functions available on the device and what you can and can't do with it. It's all probably very straight forward but, I don't like messing with anything I don't fully understand.
Is there anyone on the forum who knows this device well and could answere a few questions for me please, or, anyone in my area who could give a demo of the various functions........Thanks.
Click to expand...
The Wammer and Datatek know the device well...
 
tony2 said:
Evening all,

Received my Nanocom Evolution II today and have been having a bit of a play. All it came with was a single A5 sheet "Quick Setup Guide V 1.1".
Went onto Nanocom Website, obtained unlock codes and entered into device ok.
Have looked at the on line User Guide which tells you the basics but have been unable to find anything that explaines the various functions available on the device and what you can and can't do with it. It's all probably very straight forward but, I don't like messing with anything I don't fully understand.
Is there anyone on the forum who knows this device well and could answere a few questions for me please, or, anyone in my area who could give a demo of the various functions........Thanks.
Click to expand...
ask dogsbody nicely he says even he can use it !!!!
 
I don't think that I'm one of the 12 chosen tribes but mine came with a thumb stick describing all the functions. I think they are online as well.

Here you go

:: Download - Nanocom ::

G~

Edit: I'm sure that it is written down somewhere but, although it appears that you can flick from test to test, some of them require you to shut the gizmo down and start again. If you get a can't communicate with xxxx, it is worth restarting the Nanocom.
 
Last edited:
No thumbstick on mine either but there was a link to some online guides somewhere. Think it was the same place you went to unlock it? Either way, I downloaded a load of the pdfs. Most of it is pretty intuitive once you click through it. I use a slightly rounded broken pencil to press the buttons as it is a little on the small size!
 
Worth putting them of a thumb stick with the two versions of Rave, Microcat and Wammers' musings.

If you tried printing that lot to stick in the car for reference, you'd find that you couldn't get in!

G~
 
You must log in or register to reply here.

Similar threads

Parv
iCarSoft Pro + vs Nanocom Evolution
Replies
2
Views
439
Parv
Parv
8v_chris
P38A EAS & Nanocom - not talking to each other!
2
Replies
28
Views
3K
8v_chris
8v_chris
jordanpc2
P38A Nanocom near Lanarkshire?
2 3 4
Replies
67
Views
5K
Doolinjames
D
I
Beeper refuses to shut up
Replies
5
Views
327
ironhorse
I
P38 Monkey
Nanocom question (pre-purchase)
2 3
Replies
55
Views
3K
Datatek
Datatek
Back
Top