Disco 2 New member
- Thread starter Trecker
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
brianconwy
Well-Known Member
- Posts
- 1,112
- Location
- conwy, north wales
Welcome to the forum. I am sure someone will be here with an answer soon.
Thanks for York response
brian47
Well-Known Member
- Posts
- 8,867
this could be the start of the infamous "3 amigos". There's loads of information here on the forum about it.
Before you go any further, get the codes read with a compatible code reader, especially in the SLABS ECU.
Before you go any further, get the codes read with a compatible code reader, especially in the SLABS ECU.
Thanks for your answer how much will it cost to retrieve thesee codes I don't have a reader?
brian47
Well-Known Member
- Posts
- 8,867
At a Land Rover main stealer, I'd be thinking about a second mortgage!
Maybe there's a LandyZone member in your area who can help out.
If you're thinking about keeping your Disco I'd consider buying a code reader, but make sure that it is compatible; Nanocom, Hawkeye or Lynx. There is another one which @sierrafery keeps mentioning too which is a bit cheaper.
As the Disco gets older, more troubles might start appearing, so even if you find a "nice" indie garage to read the codes for you, it's still likely to cost anything between 50 and 80 quid per visit! Don't ask me why, I reckon they see it as a "captive audience", so it might be worth considering your own.
Just been looking on the net at prices for code reader thought I had seen one for £40 then saw it was hire price
Bobdog
Well-Known Member
- Posts
- 4,286
- Location
- Horsham West Sussex
i've had this same problem. 2 lights very occasionally and only under constant stop/start braking in traffic. then i had the 3 amigos. found someone with a nanocom and traced it to the nearside front hub. reset the lights but not got around to changing the hub yet. however, i have recently acquired a braking wobble from higher speed. i also previously felt a very slight pulsing under light braking at slow speed. i now strongly suspect a warped disc which could possibly be setting off the warning lights, registering as a hub fault. when i get paid, i'll be getting a new set of front discs and pads and checking the calipers for sticking...
One off fee of £300 for a code reader, Hawkeye or Nanocom
Or ask if anyone local to you can do it
Royston 90
Active Member
- Posts
- 249
- Location
- Royston
Not a million miles away from you if you want to come use my hawkeye. I`m currently flat out doing stuff at the moment otherwise I would travel to you. I`m in Fowlmere not far from Duxford.
Dan
