New Member P38 2.5 DSE questions

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
P

phantom21

New Member
Posts
58
Location
West Susex
Hi All
Got my first P38 DSE Auto last week
Very pleased with it so far but as expected it's not without issues.
Remote unlocks and locks rear doors but not the fronts,
Key will lock the rear doors but not the passenger front. How likely is this to be sticky actuators or U/S lock units.

Also engine vibration at idle is a little more than expected especially when warm, nothing major and the engine is not dancing around or lumpy. all smooths out when just off idle all the way up. Do the engine mounts age or should there be any dampers fitted that are missing.

Drivers window stops 5mm short of closed with a Thump Thump Thump if you hold the button down. I believe this is just a window regulator required Yes/No?

And last The radio channel search only finds 2 or three of the strongest stations, is the reception generally poor or do i possibly have a bad ariel unit

Thanks in Advance
Karl
 
phantom21 said:
Hi All
1) Got my first P38 DSE Auto last week
Very pleased with it so far but as expected it's not without issues.

2) Remote unlocks and locks rear doors but not the fronts,
Key will lock the rear doors but not the passenger front. How likely is this to be sticky actuators or U/S lock units.

3) Also engine vibration at idle is a little more than expected especially when warm, nothing major and the engine is not dancing around or lumpy. all smooths out when just off idle all the way up. Do the engine mounts age or should there be any dampers fitted that are missing.

4) Drivers window stops 5mm short of closed with a Thump Thump Thump if you hold the button down. I believe this is just a window regulator required Yes/No?

5) And last The radio channel search only finds 2 or three of the strongest stations, is the reception generally poor or do i possibly have a bad ariel unit

Thanks in Advance
Karl
Click to expand...

1) well done

2) strip out the locks and strip them down, plug em in and fiddle with the remote see whats working and whats not, usually just moving the internal parts frees em off enough to avoid buying new ones!

3) i believe this is documented, a search should reveal some tips

4) window regs are common failure points. about 40 for a replacement. some drilling and 4 nut and bolts req'd

5) look under the parcel shef supports, i think the am fm amp is under drivers side. check it is plugged in as some people mistake this for the alarm reciever( which also causes its own set of issues) and unplug it

and lastly, update your location info so any help can be directed at the folks closest to you!

and finally

:welcome2::welcome2::welcome2::welcome2::welcome2::welcome2::welcome2::welcome2::welcome2:
 
phantom21 said:
Hi All
Got my first P38 DSE Auto last week
Very pleased with it so far but as expected it's not without issues.
Remote unlocks and locks rear doors but not the fronts,
Key will lock the rear doors but not the passenger front. How likely is this to be sticky actuators or U/S lock units.

Also engine vibration at idle is a little more than expected especially when warm, nothing major and the engine is not dancing around or lumpy. all smooths out when just off idle all the way up. Do the engine mounts age or should there be any dampers fitted that are missing.

Drivers window stops 5mm short of closed with a Thump Thump Thump if you hold the button down. I believe this is just a window regulator required Yes/No?

And last The radio channel search only finds 2 or three of the strongest stations, is the reception generally poor or do i possibly have a bad ariel unit

Thanks in Advance
Karl
Click to expand...

I'll just add to what Gav say's, the lumpy idle may be due to the idle speed being too slow, this can I believe be adjusted via testbook or Rovercom. What is the idle speed? Could be shagged engine mounts.:eek:

Window regulators are a common failure item, I got mine from www.rimmerbros.co.uk PART NUMBER CVF100740P for the drivers side £63.62 inc VAT. probably find them cheaper on EBAY but as I'm in France not everyone will ship to me.:(

Radio reception is not brilliant as the aerial is in the glass and not as effective as an old fashiond stick on the roof, but as Gav says could be the amp disconnected or faulty.
:welcome2:
 
Thanks for the replies.
I'm possibly being a bit fussy with the vibration thing, this is my first diesel car. it is purely vibration ,no lumpiness and you can't visibly see the engine moving about. I'm comparing it with my daughters 307 Diesel and in that you can't feel if the engine is running or not. Not looked at idle speed but it feels about right. for the first 30 seconds after starting the idle is higher, and a bit smoother. Is this a feature of the HOT FIX box I've got fitted?

As I have nothing to compare with I suppose the question is, Generally are these things very smooth at idle ?
 
rewmer said:
I hope you have the timed hot fix. I have seen the results of not having the timer relay fitted. Big bad :eek:
Click to expand...

I think it is timed, Popped the box open and inside is a relay but also along side it an 8 pin chip. How does this work? Is it fooling the ecu with a low temp condition for sart and the following 30 seconds
 
The 8 pin chip is probably a 555 timer chip which holds the relay energised for 30 seconds making the ECU think the engine is cold. Usually this mod is done to compensate for a worn injector pump. A worn injector pump will also affect the idle speed, so never mind the idle speed feels about right, what is the idle speed on the rev counter?
 
Datatek said:
The 8 pin chip is probably a 555 timer chip which holds the relay energised for 30 seconds making the ECU think the engine is cold. Usually this mod is done to compensate for a worn injector pump. A worn injector pump will also affect the idle speed, so never mind the idle speed feels about right, what is the idle speed on the rev counter?
Click to expand...

It idles a knats' past the 666 mark
 
You must log in or register to reply here.

Similar threads

J
Another P38 2.5DSE 4th injector Question
2
Replies
28
Views
1K
JT_spark
J
Louis2.5DSE
P38A P38 DSE fires but won't start
2 3
Replies
58
Views
3K
BDC
B
A
P38 2.5 Diesel - running issues
2
Replies
24
Views
3K
Datatek
Datatek
J
P38 DSE FIP issues
Replies
6
Views
1K
stemac33
stemac33
kitcat
P38A Range Rover 97 2.5 DSE Cranks But Will Not Start - Help Please
Replies
15
Views
2K
Grrrrrr
Grrrrrr
Back
Top