New Dizzy needed. Which manufacturer?

Hi All.

Sorry to be on the scrounge for answers/advice again so soon.

I believe i need a new Dizzy (its the only part I haven't changed on my electronics and thought what the hell!).

I am looking at simonbbc's site and they can supply either a Lucas 35DLM8 or their own powerspark version.

I have asked them and they claim they are the same although the powerspark is pattern but produces a better spark.

Anyone with any experience of the powerspark or for £20 odd notes shall i play it safe and get the Lucas?

I have seen a lot of positive reviews for the powerspark electronic conversions but not the full dizzy.

Cheers

is there a reason for replaceing your dizy
not to insult your intelligents but the coil .leads and plugs are wot make a good spark

I am suspecting the Dizzy for three reasons.

1. I tried each lead directly on the coil and they all gave good sparks.

2. It has Lucas rotor arm and cap so i know they are as good as can be.

3. I took the dizzy apart to change the internals (thinking this was a problem) and the pattern parts where shocking...Meaning my re-install is suspect.

the lucas name was bought out.
the dizzy i was looking at on Tbay looked the same as the powerspark one.
probbley mad in same factory.if so go for the cheep one.
could be wrong though

those pattern parts that shocked you are probs what new ones are built with tbh

Hi rich.
I had problems with my bobtailed RRC, dizzy internals all siezed up, one bob weight was actually broken.
I bought a new powerspark one off the 'bay, and has been fine for several months of mudding so far

Cheers Joe.

I think i'll risk it seeing as its got a 3 year warranty and most feedback is pretty positive.