New Clutch

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
andyb66 said:
How long is a piece of string? :) Depends on usage.

Describe your symptoms, maybe someone can help :)
Click to expand...

Fitted a new clutch and back plate, made double sure that all was clean and oil free, took the car out for a drive and all seems ok but if I give the engine wellie the clutch will slip slightly.
 
it is possible that fluid isnt returnig fully you cab check by slackening bleed nipple to see if theres pressure in system without pedal pressed after pumping pedal
 
jamesmartin said:
it is possible that fluid isnt returnig fully you cab check by slackening bleed nipple to see if theres pressure in system without pedal pressed after pumping pedal
Click to expand...
I have fitted new slave, master cylinder, lever and full clutch, I have released the nipple no presure.
 
Did you get the flywheel resurfaced, just did my clutch and when I took it all to bits the flywheel was f****d cracked and scored and hot spots all over it, this prob would not make it slip but it did wear the old clutch bad and mine slipped like mad before.
 
No good guys the new clutch has got to come out again, ------ thing slips, it’s either a bum friction plate or a bum pressure plate, I’ll plumb for the friction plate, how annoying is that.
 
steveo999 said:
Did you get the flywheel resurfaced, just did my clutch and when I took it all to bits the flywheel was f****d cracked and scored and hot spots all over it, this prob would not make it slip but it did wear the old clutch bad and mine slipped like mad before.
Click to expand...
No flywheel was fine, only replaced clutch because push rod had gone through the lever.
 
Ok my findings on the clutch the friction plate was shiny in places but the friction material was hard not from heat just rubbish, and the back plate well how they can get away with selling this rubbish it’s less than sub standard absolute crap
 
You must log in or register to reply here.

Similar threads

C
Disco 2 Holding revs between gear changes
Replies
5
Views
265
sierrafery
sierrafery
Corne215
Clutch not releasing
Replies
11
Views
887
marjon
marjon
Corne215
Clutch not releasing
Replies
0
Views
256
Corne215
Corne215
S
Discovery 3
Replies
5
Views
225
Anaconda
A
Corne215
manual transmission not selecting gears when idle
Replies
16
Views
1K
Corne215
Corne215
Back
Top