Hi guyz, i need help if possible with my 2005 Land Rover Freelander SE Cruise Control does not work. it all started happening when i took the entire front panel appart to replace my heat core that was leaking. i put everything back together (pretty sure all cable conected right) i checked the connections and everything passes. when i turn the switch (cruise control switch on) it lights up then i try to maintain speed need and pressing "set+" its not engaging at all, and light on front panel above odometer doesnt show either. i tried everything to fix it and still know what it could be, i checked all fuses too - they are fine aswell. if anyone ha same problem or know how to fix this problem please post you advices here, i would be realy apreciated. ty in advance, and sorry for my english grammar - im russian and not realy know english grammar that well yet
Need help pls Cruise Control
- Thread starter serji4ok
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Hippo
Lord Hippo
- Posts
- 53,949
Welcome to the forum.
Look under the bonnet by the battery. The cruise control pump is there somewhere. In the photo below, look for the pipe just below the arrow head. This often snaps or disconnects when your working in that area. This will stop the cruise control working. Also look under the drivers seat. The cruise control computer is there. Check to see if the connectors have fallen off.
Look under the bonnet by the battery. The cruise control pump is there somewhere. In the photo below, look for the pipe just below the arrow head. This often snaps or disconnects when your working in that area. This will stop the cruise control working. Also look under the drivers seat. The cruise control computer is there. Check to see if the connectors have fallen off.
